Electrical Connection; Installation And Connections - Hama 00095266 Bedienungsanleitung

Electrical connection

The electrical connections must be made according to the following
instructions in order to ensure safe and error-free operation:
■ Before you connect the device, compare the connection data for
the power supply adapter (voltage and frequency) on the type pla-
te with that of your mains power supply. This data must match to
avoid damage to the device.
■ Keep the cable away from hot surfaces and sharp edges.
■ Make sure not to bend the cable or pull it too tightly.

Installation and connections

For continuous playback, the device can be placed on a fl at surface or
hung on the wall.
 Position the device upright or on its side.
 For wall mounting, use the mount located on the rear side of the
device.
CAUTION
The device can be damaged if it tips over or falls down.
► Make sure that the device cannot tip over.
 Connect the connection cable to the socket on the device and
plug in the power supply adapter.
NOTE
► Only use the enclosed power supply adapter.
The angle of the digital picture frame on the desk can be chan-
ged with the adjustable stand. The stand can be pulled out in 6
different lengths as you require.
GB
37