Werbung
Function
Static roller test stand to test or demonstrate
the drive functions of H0 vehicles.
Suitable for locomotives using the central power
G
rail system (Märklin H0) and two-rail system
(Trix H0).
G
Suitable for supply with DC current (max. 14 V),
AC current (max. 16/24 V) or use with a multiple
train system (e.g Märklin Delta or Digital,
Trix Selectrix).
G
Comes as standard with 4 pairs of rollers for
each powered axle. The positioning of these pairs
of rollers can be varied. The number of installed
pairs of rollers can be changed.
G
In addition, there are 2 track sections to accom-
modate non-powered axles (the tender on a
steam locomotive, front or rear bogie, etc.) The
longer track section (on the side with the connec-
tor boxes) is connected to the drive current and
must therefore remain attached. The shorter track
section on the other end can be removed and, if
necessary, further pairs of rollers can be added.
G
Can be expanded using the additional pair of
rollers 78110 for models with more than 4 powered
axles.
G
Can be expanded with the display device 78111
to show various speeds and times. An additional
pair of rollers with a sensor to calculate the speed
is included in what is supplied with 78111.
G
Length of the static roller test stand: 400 mm.
Maximum usable length: 350 mm.
3
Werbung
