Victron energy BMV-700 Anleitung Seite 31

5 MORE ABOUT PEUKERT'S FORMULA AND MIDPOINT
MONITORING
5.1 Peukert's formula: battery capacity and discharge rate
The value which can be adjusted in Peukert's formula is the exponent n:
see the formula below.
In the BMV Peukert's exponent can be adjusted from 1.00 to 1.50. The
higher the Peukert exponent the faster the effective capacity "shrinks"
with increasing discharge rate. An ideal (theoretical) battery has a
Peukert Exponent of 1.00 and has a fixed capacity; regardless of the size
of the discharge current. The default setting for the Peukert exponent is
1.25. This is an acceptable average value for most lead acid batteries.
Peukert's equation is stated below:
n
 
Cp I t
where Peukert's exponent n =
The battery specifications needed for calculation of the Peukert exponent
are the rated battery capacity (usually the 20 h discharge rate
example a 5 h discharge rate
calculate the Peukert exponent using these two specifications.
5 h rating
1
Please note that the rated battery capacity can also be the 10 h or even 5 h discharge
rate.
2
The 5 h discharge rate in this example is just arbitrary. Make sure that besides the C
rating (low discharge current) a second rating with a substantially higher discharge current
is chosen.
2
. See below for an example of how to

C 75 Ah
5 h

t 5 h
1
75 Ah
 
I 15 A
1
5 h

log t log t
2 1

log I log I
1 2
1
) and for
20
29