ASROCK ALiveNF5-VSTA R2.0 Handbuch Seite 26

A. NVIDIA RAID Driver (required)
B. NVIDIA nForce Storage Controller (required)
Please select A and B for Windows
RAID drivers needed for RAID mode, you have to select them separately. Please specify
the first RAID driver and then specify again for the second one.)
NOTE. If you install Windows
HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up "SATA Operation Mode" to [RAID]
in BIOS first. Then, please set the RAID configuration by using the Windows RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
2.13.2 Installing Windows 2.13.2 Installing Windows
2.13.2 Installing Windows 2.13.2 Installing Windows 2.13.2 Installing Windows
RAID Functions RAID F RAID F RAID F RAID F
If you want to install Windows
HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [RAID].
STEP 2: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 3: Install Windows
Insert the Windows ® Vista
to boot your system, and follow the instruction to install Windows
TM
Vista 64-bit OS on your system. When you see "Where do you want to install Windows?
" page, please insert the ASRock Support CD into your optical drive,
and click the "Load Driver" button on the left on the bottom to load the NVIDIA
drivers. NVIDIA ® RAID drivers are in the following path in our Support CD:
.. \ I386 \ Vista32_RAID (For Windows
.. \ AMD64 \ Vista64_RAID (For Windows
After that, please insert Windows
the optical drive again to continue the installation.
NOTE. If you install Windows
manage (create, convert, delete, or rebuild) RAID functions on SATA / SATAII HDDs,
you still need to set up "SATA Operation Mode" to [RAID] in BIOS first. Then, please
set the RAID configuration by using the Windows RAID installation guide in the
following path in the Support CD:
.. \ RAID Installation Guide
2 6 2 6 2 6
2 6 2 6
ASRock
® 2000 / XP / XP 64-bit in RAID mode. (There are two
® 2000 / Windows ® XP / Windows
Vista Vista
Vista Vista Vista
TM TM TM TM TM
®
unctions unctions unctions unctions
® Vista TM / Windows ®
Advanced screen
® Vista TM / Vista TM 64-bit OS on your system.
TM / Windows ® Vista TM 64-bit optical disk into the optical drive
® Vista TM OS)
®
Vista
® TM
Vista / Windows
® TM ®
Vista / Windows Vista
ALiveNF5-VSTA
® XP 64-bit on IDE
/ Vista / Vista 64-bit With 64-bit With
/ Vista / Vista / Vista 64-bit With 64-bit With 64-bit With
TM TM TM TM TM
Vista TM 64-bit on your SATA / SATAII
IDE Configuration.
® TM
Vista / Windows
TM
64-bit OS)
® TM
Vista 64-bit optical disk into
TM
64-bit on IDE HDDs and want to
Motherboard
®
® RAID