Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
After that, please insert Windows
the optical drive again to continue the installation.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [non-RAID].
STEP 2: Install Windows
®
2 . 1 3
2 . 1 3
Installing Windows
Installing Windows
2 . 1 3
2 . 1 3 Installing Windows
2 . 1 3
Installing Windows
Installing Windows
/ Vista
/ Vista
/ Vista
/ Vista
/ Vista
TM
TM
TM
TM
TM
If you want to install Windows
Vista
TM
or Windows
®
Vista
TM
please follow below procedures according to the OS you install.
Before installing Windows
disk is supposed to include SP4. If there is no SP4 included in your disk, please
visit the below website for proper procedures of making a SP4 disk:
http://www.microsoft.com/Windows2000/downloads/servicepacks/sp4/spdeploy.
htm#the_integrated_installation_fmay
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
2.13.1 Installing Windows
F F F F Functions
unctions
unctions
unctions
unctions
If you want to install Windows
/ SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 2: Make a SATA / SATAII driver diskette.
Please make a SATA / SATAII driver diskette by following section 2.12.1 step 2 on
page 23.
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide part of the document in the following path in the Support CD:
.. \ RAID Installation Guide
®
STEP 4: Install Windows
After step1, 2, 3, you can start to install Windows
64-bit OS on your system. At the beginning of Windows
third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette contain-
ing the NVIDIA
®
RAID driver. After reading the floppy disk, the drivers will be presented.
Select the drivers to install. The drivers are as below:
ASRock
®
TM
®
Vista
/ Windows
Advanced screen
Vista
TM
/ Vista
TM
64-bit OS on your system.
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
2000 / XP / XP 64-bit / Vista
®
64-bit With RAID F
64-bit W
64-bit W
ith RAID F
ith RAID F
ith RAID Functions
64-bit W
64-bit W
ith RAID F
®
2000, Windows
®
XP, Windows
64-bit on your SATA / SATAII HDDs with RAID functions,
®
2000 to your system, your Windows
2000 / XP / XP 64-bit With RAID
2000 / XP / XP 64-bit With RAID
2000 / XP / XP 64-bit With RAID
2000 / XP / XP 64-bit With RAID
2000 / XP / XP 64-bit With RAID
®
®
2000 / Windows
®
XP / Windows
Advanced screen
2000 / XP / XP 64-bit OS on your system.
®
2000 / Windows
ALiveNF5-VSTA
Motherboard
TM
Vista
64-bit optical disk into
IDE Configuration.
TM
TM
TM
TM
TM
unctions
unctions
unctions
unctions
®
XP 64-bit, Windows
®
2000 optical
®
XP 64-bit on your SATA
IDE Configuration.
®
®
XP / Windows
XP
®
setup, press F6 to install a
®
2 5
2 5
2 5
2 5
2 5
Werbung
Inhaltsverzeichnis
