Herunterladen Inhalt Inhalt Diese Seite drucken

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 52
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2007 ASRock INC. All rights reserved.
ASRock
Published December 2007
ALiveNF5-VSTA
Motherboard
1 1 1 1 1

Werbung

Inhaltsverzeichnis
loading

Inhaltszusammenfassung für ASROCK ALiveNF5-VSTA R2.0

  • Seite 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
  • Seite 2 Fourth SATAII Connector (SATAII_4, Red) PCI Express x1 Slot (PCIE2) Primary SATAII Connector (SATAII_1, Red) PCI Express x16 Slot (PCIE1) Secondary SATAII Connector (SATAII_2, Red) 30 ATX Power Connector (ATXPWR1) SPI Flash 2 2 2 2 2 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 3 ASRock HD 6CH I/O P ock HD 6CH I/O P ock HD 6CH I/O P ock HD 6CH I/O Panel anel anel anel ock HD 6CH I/O P anel Parallel Port USB 2.0 Ports (USB01) RJ-45 Port USB 2.0 Ports (USB23)
  • Seite 4 Introduction Introduction Thank you for purchasing ASRock ALiveNF5-VSTA motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It de- livers excellent performance with robust design conforming to ASRock’s commit- ment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-by- step installation guide.
  • Seite 5 - CPU Frequency Stepless Control (see CAUTION 5) - ASRock U-COP (see CAUTION 6) - Boot Failure Guard (B.F.G.) - ASRock AM2 Boost: ASRock Patented Technology to boost memory performance up to 12.5% (see CAUTION 7) Expansion Slot - 1 x PCI Express x16 slot...
  • Seite 6 64-bit compliant Certifications - FCC, CE, WHQL Certificated * For detailed product information, please visit our website: http://www.asrock.com WARNING Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the third- party overclocking tools.
  • Seite 7 64-bit / Vista / XP 64-bit / XP SP1 or SP2 / 2000 SP4. 10. WiFi/E header supports WiFi+AP function with ASRock WiFi-802.11g or WiFi-802.11n module, an easy-to-use wireless local area network (WLAN) adapter. It allows you to create a wireless environment and enjoy the convenience of wireless network connectivity.
  • Seite 8 64bit VGA memory (Basic) * After June 1, 2007, all Windows ® Vista systems are required to meet above minimum hardware requirements in order to qualify for Windows ® Vista Premium 2007 logo. 8 8 8 8 8 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 9 When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard. 9 9 9 9 9 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 10: Cpu Installation

    Then connect the CPU fan to the CPU FAN connector (CPU_FAN1, see Page 2, No. 3). For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 11 Channel, for example, installing a pair of memory modules in DDRII_1 and DDRII_3, it is unable to activate the Dual Channel Memory Technology . It is not allowed to install a DDR memory module into DDR2 slot; otherwise, this motherboard and DIMM may be damaged. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 12: Installing A Dimm

    DIMM if you force the DIMM into the slot at incorrect orientation. Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 13: Installing An Expansion Card

    PCIE2 / PCIE3 (PCIE x1 slot) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc. If you want to use ASRock DeskExpress function on this motherboard, please install ASRock PCIE_DE card on PCIE3 slot.
  • Seite 14 BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clear-CMOS action. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 15 SATA power cable to the power connector on each drive. Then (Optional) connect the white end of SATA connect to the SATA HDD power connector power cable to the power connect to the connector of the power supply. power supply ASRock ALiveNF5-VSTA Motherboard...
  • Seite 16 (see p.2, No. 17) motherboard. This USB 2.0 header can support two USB 2.0 ports. WiFi/E Header This header supports WiFi+AP function with ASRock (15-pin WIFI/E) WiFi-802.11g or WiFi-802.11n (see p.2 No. 21) module, an easy-to-use wireless local area network (WLAN) adapter.
  • Seite 17 (see p.2, No. 19) ground pin. CPU Fan Connector Please connect the CPU fan cable to this connector and (4-pin CPU_FAN1) match the black wire to the (see p.2, No. 3) ground pin. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 18 HDMI_SPDIF header, providing SPDIF audio output to HDMI VGA (3-pin HDMI_SPDIF1) card, allows the system to (see p.2, No. 25) con nect HDMI Digital TV/ projector/LCD devices. Please connect the HDMI_SPDIF connector of HDMI VGA card to this header. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 19 (Optional) HDMI_SPDIF header on the motherboard. Then connect the white end (B or C) of HDMI_SPDIF cable to the ation HDMI_SPDIF connector of HDMI VGA card. A. black end B. white end (2-pin) C. white end (3-pin) ASRock ALiveNF5-VSTA Motherboard...
  • Seite 20 Connect the HDMI output connector on HDMI VGA card to HDMI device, such as HDTV. Please refer to the user manual of HDTV and HDMI VGA card vendor for detailed connection procedures. Step 5. Install HDMI VGA card driver to your system. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 21 Please visit HITACHI’s website for details: http://www.hitachigst.com/hdd/support/download.htm The above examples are just for your reference. For different SATAII hard disk products of different vendors, the jumper pin setting methods may not be the same. Please visit the vendors’ website for the updates. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 22 Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 23: Installing Windows

    Set the “SATA Operation Mode” option to [AHCI]. STEP 2: Make a SATA / SATAII driver diskette. Insert the ASRock Support CD into your optical drive to boot your system. During POST at the beginning of system boot-up, press <F11> key, and then a window for boot devices selection appears.
  • Seite 24 64-bit OS on your system. When you see “Where do you want to install Windows? ” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the NVIDIA ®...
  • Seite 25 RAID driver. When prompted, insert the SATA / SATAII driver diskette contain- ing the NVIDIA ® RAID driver. After reading the floppy disk, the drivers will be presented. Select the drivers to install. The drivers are as below: ASRock ALiveNF5-VSTA Motherboard...
  • Seite 26 64-bit OS on your system. When you see “Where do you want to install Windows? ” page, please insert the ASRock Support CD into your optical drive, and click the “Load Driver” button on the left on the bottom to load the NVIDIA ®...
  • Seite 27 PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment. Please refer to the warning on page 6 for the possible overclocking risk before you apply Untied Overclocking Technology. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 28 ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.EXE” from the “BIN” folder in the Support CD to display the menus. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 29 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 30 ™ ‘ ’ ™ ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 31 ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 32 ® ® ® ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 33 ® ® ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 34 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 35 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 36 DDRII_1 DDRII_2 DDRII_3 DDRII_4 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 37 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 38 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 39 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 40 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 41 ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 42 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 43 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 44 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 45 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 46 ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 47 ® ® ® ® ® ® ® ® ® ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 48 ® ® ® ® A. NVIDIA nForce Storage Controller (required) Windows XP/2000 B. NVIDIA nForce Storage Controller (required) Windows XP64 ® ® ® ® ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 49 ® ® ® ® ® ® ® ® ® ® ® ® ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 50 ® ® ASRock ALiveNF5-VSTA Motherboard...
  • Seite 51 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 52: Einführung

    Wir danken Ihnen für den Kauf des ASRock ALiveNF5-VSTA Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.
  • Seite 53: Spezifikationen

    Hybrid Booster - Schrittloser CPU-Frequenz-Kontrolle (siehe VORSICHT 5) - ASRock U-COP (siehe VORSICHT 6) - Boot Failure Guard (B.F.G. – Systemstartfehlerschutz) - ASRock AM2 Boost: ASRocks patentgeschützte Technologie zur Erhöhung der Arbeitsspeicherleistung um bis zu 12,5% (siehe VORSICHT 7) Erweiterungs- - 1 x PCI Express x 16-Steckplätze...
  • Seite 54 64-Bit Zertifizierungen - FCC, CE, WHQL * Für die ausführliche Produktinformation, besuchen Sie bitte unsere Website: http://www.asrock.com WARNUNG Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems...
  • Seite 55 Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen. Dieses Motherboard unterstützt die ASRock AM2 Boost Übertaktungstechnologie. Wenn Sie diese Funktion im BIOS-Setup aktivieren, wird die Arbeitsspeicherleistung um bis zu 12,5% gesteigert. Die Wirkung hängt aber von der verwendeten AM2 CPU ab.
  • Seite 56: Minimale Hardwarevorausetzungen Für Windows

    64-Bit / Vista / XP 64-Bit / XP SP1 oder SP2/2000 SP4 einwandfrei. 10. WiFi/E Sockel unterstützt WiFi+AP Funktion mit ASRock WiFi-802.11g oder WiFi-802.11n Modul, einem einfach zu bedienenden Wireless Local Area Network (WLAN) Adapter. Damit sind Sie in der Lage, ein drahtloses Netzwerk aufzubauen und die Vorzüge drahtloser...
  • Seite 57: Sicherheitshinweise Vor Der Montage

    Wenn Sie Komponenten ausbauen, legen Sie sie immer auf eine antistatische Unterlage, oder zurück in die Tüte, mit der die Komponente geliefert wurde. Wenn Sie das Motherboard mit den Schrauben an dem Computergehäuse befestigen, überziehen Sie bitte die Schrauben nicht! Das Motherboard kann sonst beschädigt werden. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 58: Installation Des Cpu-Lüfters Und Des Kühlkörpers

    Kontakt zueinander haben. Verbinden Sie dann den CPU- Lüfter mit dem CPU-LÜFTER-Anschluss (CPU_FAN1, siehe Seite 2, Nr. 3). Beziehen Sie sich für eine richtige Installation auf die Handbücher des CPU- Lüfters und des Kühlkörpers. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 59: Installation Der Speichermodule (Dimm)

    3. Ist ein Speichermodulpaar NICHT im gleichen “Dual-Kanal” installiert, z.B. ein Speichermodulpaar wird in DDRII_1 und DDRII_3 installiert, kann es die Dual-Kanal-Speichertechnologie nicht aktivieren. 4. Es ist nicht zulässig, DDR in einen DDR2 Steckplatz zu installieren; andernfalls könnten Motherboard und DIMMs beschädigt werden. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 60: Einsetzen Eines Dimm-Moduls

    Steckplätze zu zwingen, führt dies zu dauerhaften Schäden am Mainboard und am DIMM-Modul. Schritt 3: Drücken Sie die DIMM-Module fest in die Steckplätze, so dass die Halteklammern an beiden Enden des Moduls einschnappen und das DIMM-Modul fest an Ort und Stelle sitzt. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 61: Erweiterungssteckplätze (Pci-Steckplätze Und Pci Express Express -Steckplätze) -Steckplätze)

    PCIE2 / PCIE3 (PCIE x1-Steckplatz) wird für PCI Express- Grafikkarten mit x1-Busbreite verwendet wie Gigabit LAN- Karten, SATA2-Karten, usw. eingesetzt. Möchten Sie die ASRock DeskExpress-Funktion auf diesem Motherboard verwenden, dann installieren Sie bitte die ASRock PCIE_DE-Karte im PCIE3-Steckplatz. Einbau einer Erweiterungskarte Einbau einer Erweiterungskarte...
  • Seite 62: Einstellung Der Jumper

    CMOS gelöscht wurde. Bitte vergessen Sie nicht, den Jumper wieder zu entfernen, nachdem das CMOS gelöscht wurde. Wenn Sie den CMOS- Inhalt gleich nach dem Aktualisieren des BIOS löschen müssen, müssen Sie zuerst das System starten und dann wieder ausschalten, bevor Sie den CMOS-Inhalt löschen. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 63: Anschlüsse

    SATAII-Schnittstelle (SATAII_4: siehe S.2, Punkt 12) ermöglicht eine Datenübertragungsrate bis 3,0 Gb/s. Serial ATA- (SATA-) Sie können beide Enden des Datenkabel SATA-Datenkabels entweder mit der SATA / SATAII- (Option) Festplatte oder dem SATAII-Anschluss am Mainboard verbinden. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 64 USB 2.0-Anschlussleisten am Motherboard. Pro USB 2.0- Anschlussleiste werden zwei USB 2.0-Ports unterstützt. WiFi/E Sockel Dieser Sockel unterstützt WiFi+AP Funktion mit ASRock (15-pol. WIFI/E) WiFi-802.11g oder WiFi-802.11n (siehe S.2 - No. 21) Modul, einem einfach zu bedienenden Wireless Local Area Network (WLAN) Adapter.
  • Seite 65 Sie „OKAY“ klicken. System Panel Anschluss Dieser Anschluss ist für die verschiedenen Funktionen der (9-Pin PANEL1) Gehäusefront. (siehe S.2, Punkt 18) Gehäuselautsprecher-Header Schließen Sie den Gehäuselautsprecher an (4-pin SPEAKER1) diesen Header an. (siehe S.2, Punkt 16) ASRock ALiveNF5-VSTA Motherboard...
  • Seite 66 Beachten Sie bitte, dass Sie eine 12V-ATX-Netzteil Stromversorgung mit ATX 12- Volt-Stecker mit diesem (4-pin ATX12V1) Anschluss verbinden müssen, (siehe S.2, Punkt 2) damit ausreichend Strom geliefert werden kann. Andernfalls reicht der Strom nicht aus, das System zu starten. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 67 Ende (A) des HDMI_SPDIF-Kabels mit dem HDMI_SPDIF-Anschluss am Motherboard. Schließen Sie dann das weiße Ende (B oder C) des HDMI_SPDIF-Kabels an den HDMI_SPDIF-Anschluss der lieren HDMI-VGA-Karte an. A. Schwarzes Ende B. Weißes Ende (zweipolig) C. Weißes Ende (dreipolig) ASRock ALiveNF5-VSTA Motherboard...
  • Seite 68 In der Abbildung sehen Sie ein Beispiel für einen falschen Anschluss: Hier wird versucht, das HDMI_SPDIF-Kabel mit dem Lüfteranschluss der PCI Express-VGA-Karte zu verbinden. Schauen Sie in die Dokumentation Ihrer VGA-Karte und informieren Sie sich schon im Vorfeld über die richtige Nutzung der Anschlüsse. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 69: Anleitung Zur Sa

    DOS ausführbares Dienstprogramm. Auf der Internetseite von HITACHI finden Sie entsprechende Details: http://www.hitachigst.com/hdd/support/download.htm Die Beispiele oben dienen lediglich Ihrer Referenz. Die Steckbrückeneinstellungen können bei unterschiedlichen SATA II Festplatten verschiedener Hersteller abweichen. Aktualisierungen und ergänzende Informationen finden Sie auf der Internetseite des Herstellers. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 70 Betrieb ist und einwandfrei läuft. Was ist die Hot-Swap-Funktion? Wenn SATA / SATAII-Festplatten als RAID1 / RAID5 eingebaut sind, werden sie “Hot-Swap” genannt: Ein Einfügen und Entfernen von SATA / SATAII-Festplatten, während das System in Betrieb ist und einwandfrei läuft. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 71: Bit Ohne Raid-Funktionen

    Verwendung von SATA / SATAII-Festplatten mit NCQ und Hot-Plug- Funktionen SCHRITT 1: Konfigurieren Sie BIOS. Rufen Sie im BIOS-DIENSTPROGRAMM den Bildschirm „Erweitert“ und „IDE-Konfiguration“ auf. Setzen Sie die Option “SATA Operation Mode” (SATA-Betriebsmodus) auf [AHCI]. SCHRITT 2: Erstellen Sie eine SATA / SATAII-Treiberdiskette. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 72 Legen Sie die ASRock Support-CD in Ihr optisches Laufwerk, um Ihr System hochzufahren. (Legen Sie zu diesem Zeitpunkt KEINE Diskette in das Diskettenlaufwerk ein!) Während des Selbsttests zu Beginn des Systemstarts drücken Sie die <F11>- Taste – ein Fenster zur Auswahl des Boot-Laufwerkes (Startlaufwerk) erscheint.
  • Seite 73 / Vista 64-Bit Betriebssystem auf Ihrem System zu installieren. Wenn die Frage “Wo möchten Sie Windows installieren?” erscheint, legen Sie bitte die ASRock Support CD in Ihr optisches Laufwerk ein. Klicken Sie anschließend die “Treiber laden”-Schaltfläche links unten, um die NVIDIA ®...
  • Seite 74: Installation Von Windows Installation Von Windows Vista / Vista

    Async.] um. Dadurch wird der CPU-FSB beim Übertakten entkoppelt, PCI- und PCIE-Busse werden jedoch fixiert, so dass der FSB in einer stabileren Übertaktungsumgebung arbeiten kann. Beziehen Sie sich auf die Warnung vor möglichen Overclocking-Risiken auf Seite 54, bevor Sie die Untied Overclocking-Technologie anwenden. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 75 File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 76 1. Introduction Merci pour votre achat d’une carte mère ASRock ALiveNF5-VSTA, une carte mère très fiable produite selon les critères de qualité rigoureux de ASRock. Elle offre des performances excellentes et une conception robuste conformément à l’engagement d’ASRock sur la qualité et la fiabilité au long terme.
  • Seite 77 - Contrôle direct de la fréquence CPU (voir ATTENTION 5) hybride - ASRock U-COP (voir ATTENTION 6) - Garde d’échec au démarrage (B.F.G.) - ASRock AM2 Boost: Technologie brevetée par ASRock pour augmenter les performances mémoire jusqu’à 12,5% (voir ATTENTION 7) Slot d’extension...
  • Seite 78 2000 / XP / XP Media Center / XP 64-bit / Vista / Vista 64-bit Certifications - FCC, CE, WHQL * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ASRock ALiveNF5-VSTA Motherboard...
  • Seite 79 CPU le dissipateur lors de l’installation du PC. Cette carte mère prend en charge la technologie d’overbooking ASRock AM2 Boost. Si vous activez cette fonction dans la configuration du BIOS, les performances de la mémoire d’améliorent jusqu’à...
  • Seite 80 / XP 64-bit / XP SP1; SP2/ 2000 SP4. 10. L’en-tête WiFi/E accepte la fonction WiFi+AP avec le module ASRock WiFi-802.11g ou WiFi-802.11n ; c’est un adaptateur de réseau local sans-fil (WLAN) facile d’utilisation. Il vous permettra de créer un environnement sans fil et de bénéficier des avantages de la...
  • Seite 81 5. Lorsque vous placez les vis dans les orifices pour vis pour fixer la carte mère sur le châssis, ne serrez pas trop les vis ! Vous risquez sinon d’endommager la carte mère. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 82 Ensuite, connectez le ventilateur du CPU à la prise du VENTILATEUR DU CPU (CPU_FAN1, reportez-vous en page 2, No. 3). Pour une bonne installation, veuillez vous référer aux manuels d’instruction sur le ventilateur du CPU et le dissipateur. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 83 DDRII_1 et le DDRII_3, il sera impossible d’activer la Technologie de Mémoire à Canal Double. Il n’est pas permis d’installer de la DDR sur le slot DDR2; la carte mère et les DIMM pourraient être endommagés. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 84 DIMM. Etape 3. Insérez fermement le module DIMM dans son emplacement jusqu’à ce que les clips de maintien situés aux deux extrémités se ferment complètement et que le module DIMM soit inséré correctement. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 85 Express avec cartes graphiques de largeur x1 voies, telles que les cartes Gigabit LAN, les cartes SATA2, etc. Si vous voulez utiliser la fonction ASRock DeskExpress sur cette carte mère, veuillez installer la carte ASRock PCIE_DE sur le slot PCIE3.
  • Seite 86 BIOS à jour. Si vous avez besoin d’effacer la CMOS lorsque vous avez fini de mettre le BIOS à jour, vous devez d’abord initialiser le système, puis le mettre hors tension avant de procéder à l’opération d’effacement de la CMOS. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 87 3,0 Go/s. Câble de données L’une des deux extrémités du Série ATA (SATA) câble de données SATA peut être connectée au disque dur (en option) SATA / SATAIIou au connecteur SATAII sur la carte mère. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 88 2.0. En-tête WiFi/E Header Cet en-tête supporte les fonctions WiFi+AP avec le (WIFI/E br.15) module ASRock WiFi-802.11g (voir p.2 No. 21) ou WiFi-802.11n, c’est un adaptateur de réseau local sans- fil (WLAN) facile d’utilisation. Il vous permettra de créer un environnement sans fil et de bénéficier des avantages de la...
  • Seite 89 Ce connecteur offre plusieurs fonctions système en façade. (PANEL1 br. 9) (voir p.2 fig. 18) Connecteur du haut-parleur Veuillez connecter le haut- du châssis parleur de châssis sur ce connecteur. (SPEAKER1 br. 4) (voir p.2 fig. 16) ASRock ALiveNF5-VSTA Motherboard...
  • Seite 90 électrique avec (ATX12V1 br. 4) prise ATX 12V sur ce (voir p.2 fig. 2) connecteur afin d’avoir une alimentation suffisante. Faute de quoi, il ne sera pas possible de mettre sous tension. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 91 HDMI_SPDIF de la carte-mère. Connectez ensuite l’extrémité blanche (B ou C) du câble HDMI_SPDIF au ctées connecteur HDMI_SPDIF de la carte VGA HDMI. A. extrémité noire B. extrémité blanche C. extrémité blanche (2 briches) (3 briches) ASRock ALiveNF5-VSTA Motherboard...
  • Seite 92 HDMI_SPDIF au connecteur du ventilateur de la carte VGA PCI Express. Veuillez vous reporter au préalable au manuel de l’utilisateur de la carte VGA pour l’utilisation du connecteur. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 93 Pour les différents produits disques durs SATAIII provenant de différents vendeurs, les méthodes de mise en place de cavaliers ne sont pas les mêmes. Veuillez visiter le site Internet des vendeurs pour les mises à jours. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 94 Qu’est-ce que la fonction « Hot Swap » ? Si les disques durs sont montés en configuration RAID1 / RAID5 l’action d’insérer et de retirer des disques SATA / SATAII alors que le système est sous tension et en fonctionnement s’appelle le “Hot Swap”. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 95 B. Réglez l’option “SATA Operation Mode”« Mode de fonctionnement SATA » sur [AHCI]. ETAP 2: Créez une disquette pilotes SATA / SATAII. A. Insérez le CD de soutien ASRock dans votre lecteur de disque optique pour démarrer votre système. (N’insérez AUCUNE disquette dans le lecteur de disquette pour l’instant!)
  • Seite 96 Utilisation des disques durs SATA / SATAII sans NCQ et les fonctions de connexion à chaud ETAP 1: Configurez le BIOS. A. Entrez dans UTILITAIRE DE CONFIGURATION BIOS écran Avancé Configuration IDE. B. Réglez l’option “SATA Operation Mode”« Mode de fonctionnement SATA » sur [non-RAID]. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 97 / Vista 64-bits sur votre système. Lorsque vous voyez la page “Où souhaitez-vous installer Windows ?”, veuillez insérer le CD Support d’ ASRock dans votre lecteur optique, et cliquer sur le bouton “Charger le pilote” en ® ® bas à gauche pour charger les pilotes AHCI NVIDIA .
  • Seite 98 PCI et PCIE sont en mode fixé de sorte que FSB peut opérer sous un environnement de surcadençage plus stable. Veuillez vous reporter à l’avertissement en page 79 pour connaître les risques liés à l’overclocking avant d’appliquer la technologie Untied Overclocking. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 99 CD-ROM. Le Menu principal s’affiche automatiquement si “AUTORUN” est activé dans votre ordinateur. Si le Menu principal n’apparaît pas automatiquement, localisez dans le CD technique le fichier “ASSETUP.EXE” dans le dossier BIN et double-cliquez dessus pour afficher les menus. ASRock ALiveNF5-VSTA Motherboard...
  • Seite 100 Grazie per aver scelto una scheda madre ASRock ALiveNF5-VSTA, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza. Questa Guida Rapida all’Installazione contiene l’introduzione alla motherboard e la guida passo-passo all’installazione.
  • Seite 101 - Stepless control per frequenza del processore (vedi ATTENZIONE 5) - ASRock U-COP (vedi ATTENZIONE 6) - Boot Failure Guard (B.F.G.) - ASRock AM2 Boost: Tecnologia brevettata ASRock per migliorare le prestazioni della memoria fino al 12,5% (vedi ATTENZIONE 7) Slot di...
  • Seite 102 / Vista 64 bit Certificazioni - FCC, CE, WHQL * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi.
  • Seite 103 Questa scheda madre supporta la tecnologia di overclocking ASRock AM2 Boost. Se si abilita questa funzione nel Setup del BIOS, le prestazioni della memoria miglioreranno fino al 12,5%, per gli effetti dipendono sempre dalla CPU AM2 che si adotta.
  • Seite 104 11g o WiFi-802.11n ASRock, un adattatore WLAN (rete locale wireless) semplice da usare. Consente di creare un ambiente wireless e godersi la comodità di una connettività di rete wireless. Visitate il nostro sito web per la disponibilità del modulo ASRock WiFi-802.11g o WiFi-802.11n. Sito web ASRock http://www.asrock.com...
  • Seite 105 5. Nell’usare i giraviti per fissare la scheda madre al telaio non serrare eccessivamente le viti! Altrimenti si rischia di danneggiare la scheda madre. 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 106 CPU FAN (CPU_FAN1, fare riferimento a pagina 2, Numero 3). Per eseguire un’installazione appropriata, fare riferimento al manuale d’istruzioni della ventolina CPU e del dispersore di calore. 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 107 Dual Channel Memory. Non è consentito installare la DDR nello slot DDR2, altrimenti si possono danneggiare questa scheda madre e la DIMM. 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 108 Inserire saldamente la DIMM nello slot fino a far scattare completamente in posizione i fermagli di ritegno alle due estremità e fino ad installare correttamente la DIMM nella sua sede. 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 109 PCIE2 / PCIE3 (slot PCIE x1) usato per schede PCI Express con schede grafiche di larghezza x1, quali scheda Gigabit LAN, SATA2, ecc. Se si desidera utilizzare la funzione ASRock DeskExpress su questa scheda madre, installare la scheda ASRock PCIE_DE sullo slot PCIE3. Installare una scheda di espansione...
  • Seite 110 BIOS. Se è necessario cancellare la CMOS una volta completato l’aggiornamento del BIOS, è necessario riavviare prima il sistema, e poi spegnerlo prima di procedere alla cancellazione della CMOS. 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 111 Entrambe le estremità del cavo dati SATA possono collegarsi (Opzionale) all’hard disk SATA / SATAII o al connettore SATAII sulla scheda madre. 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 112 Questo header supporta la funzione WiFi+AP con il modulo (15-pin WIFI/E) WiFi-802.11g o WiFi-802.11n (vedi p.2 Nr. 21) ASRock, un adattatore per WLAN (rete locale wireless). Consente di creare un ambiente wireless e godersi la comodità di una connettività di rete wireless.
  • Seite 113 (9-pin PANEL1) (vedi p.2 item 18) Collettore casse telaio Collegare le casse del telaio a questo collettore. (4-pin SPEAKER1) (vedi p.2 item 16) 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 114 12V ATX a questo connettore (vedi p.2 item 2) in modo che possa fornire energia sufficiente. In caso contrario l’unità non si avvia. 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 115 C) del cavo HDMI_SPDIF al iedini connettore HDMI_SPDIF della scheda HDMI VGA. A. estremità nera B. estremità bianca (2 pin) C. estremità bianca (3 pin) 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 116 HDTV. Consultare il manuale dell’utente di HDTV e della scheda HDMI VGA per il collegamento dettagliato. Punto 5. Installare il driver della scheda HDMI VGA nel sistema. 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 117 Visitare i siti web dei produttori per gli aggiornamenti. 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 118 RAID1 / RAID5 allora è detta “scambio a caldo” l’azione d’inserimento e rimozione dei dischi rigidi SATA / SATAII mentre il sistema è ancora acceso ed in condizione di funzionamento. 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 119 [AHCI]. 2° PASSO: Creare un dischetto driver SATA / SATAII. Inserire il CD di supporto ASRock nel lettore ottico prima di accendere il sistema. (NON inserire nessun dischetto floppy nel drive in questo momento!) Durante la fase di POST, all’inzio del boot-up del sistema, premere il tasto <F11>.
  • Seite 120 Impostare l’opzione “SATA Operation Mode” (Modalità operativa SATA) su [non-RAID]. 2° PASSO: Installazione di Windows ® 2000 / XP / XP 64-bit sul sistema. 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 121 64-bit sul sistema. Quando si vede la pagina “Where do you want to install Windows?” (Dove si vuole eseguire l’istallazione di Windows), inserire il CD di supporto ASRock nell’unità ottica e fare clic sul pulsante “Carica driver” , in basso a sinistra, per caricare i driver NVIDIA ®...
  • Seite 122 Se il Menù principale non appare automaticamente, posizionarsi sul file ASSETUP.EXE nel CESTINO del CD di supporto e cliccare due volte per visualizzare i menù. 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 123 1. Introducción 1. Introducción Gracias por su compra de ASRock ALiveNF5-VSTA placa madre, una placa de confianza producida bajo el control de calidad estricto y persistente. La placa madre provee realización excelente con un diseño robusto conforme al compromiso de calidad y resistencia de ASRock.
  • Seite 124 - Stepless control de frecuencia de CPU (vea ATENCIÓN 5) Híbrido - ASRock U-COP (vea ATENCIÓN 6) - Protección de Falla de Inicio (B.F.G..) - ASRock AM2 Boost: tecnología patentada de ASRock que permite mejorar el rendimiento de la memoria hasta en un 12,5% (vea ATENCIÓN 7) Ranuras de - 1 x ranura PCI Express x16 Expansión...
  • Seite 125 Media Center / XP 64 bits / Vista / Vista 64 bits Certificaciones - FCC, CE, WHQL * Para más información sobre los productos, por favor visite nuestro sitio web: http://www.asrock.com 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5...
  • Seite 126 PC. Esta placa base admite la tecnología ASRock AM2 Boost para aumento de la velocidad del reloj. Si habilita esta función en la configuración del BIOS, el rendimiento de la memoria mejorará...
  • Seite 127 SP4. 10. El conector WiFi/E es compatible con la función WiFi+AP con módulo ASRock WiFi-802.11g o WiFi-802.11n, un adaptador de área local (WLAN) fácil de usar. Le permite crear un entorno de red inalámbrico y disfrutar de la comodidad proporcionada por una conectividad inalámbrica a la red.
  • Seite 128 5. Al colocar los tornillos en sus agujeros para fijar la placa madre en el chasis, no los apriete demasiado. Eso podría dañar la placa madre. 1 2 8 1 2 8 1 2 8 1 2 8 1 2 8 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 129 Página 2, N. 3). Para realizar la instalación correctamente, consulte el manual de instrucciones del ventilador de la CPU y el radiador. 1 2 9 1 2 9 1 2 9 1 2 9 1 2 9 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 130 No se permite instalar módulos DDR en la ranura DDR2; si lo hace, esta placa base y los módulos DIMM pueden resultar dañados. 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 131 Paso 3. Inserte la DIMM con firmeza dentro de la ranura hasta que los clips de sujeción de ambos lados queden completamente introducidos en su sitio y la DIMM se haya asentado apropiadamente. 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 132 Express con tarjetas gráficas con una anchura de 1 carriles, como por ejemplo, para tarjetas Gigabit LAN, SATA2, etc. Si desea usar la función ASRock DeskExpress en esta placa base, instale la tarjeta ASRock PCIE_DE en la ranura PCIE3. Instalación de T Instalación de T...
  • Seite 133 CMOS cuando acabe de finalizar la actualización de la BIOS, debe arrancar primero el sistema y, a continuación, apagarlo antes de realizar la acción de borrado de CMOS. 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 134 Ambos extremos del cable serie ATA (SATA) pueden conectarse al disco duro SATA / SATAII o la (Opcional) conexión de la placa base. 1 3 4 1 3 4 1 3 4 1 3 4 1 3 4 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 135 USB 2.0. Conector WiFi/E Este conector es compatible con la función WiFi+AP con el (15-pin WIFI/E) módulo ASRock WiFi-802.11g o (vea p.2, N. 21) WiFi-802.11n, un adaptador de área local (WLAN) fácil de usar. Le permite crear un entorno de red inalámbrico y disfrutar de la...
  • Seite 136 (vea p.2, No. 18) Cabezal del altavoz del chasis Conecte el altavoz del chasis a su cabezal. (4-pin SPEAKER1) (vea p.2, No. 16) 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 137 (vea p.2, N. 2) con el enchufe ATX 12V, de modo que proporcione suficiente electricidad. De lo contrario no se podrá encender. 1 3 7 1 3 7 1 3 7 1 3 7 1 3 7 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 138 HDMI_SPDIF en el conector HDMI_SPDIF de la tarjeta VGA HDMI. A. Extremo negro B. Extremo blanco (2 patillas) C. Extremo blanco (3 patillas) 1 3 8 1 3 8 1 3 8 1 3 8 1 3 8 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 139 VGA HDMI para conocer el procedimiento detallado de conexión. Paso 5. Instale el controlador de la tarjeta VGA HDMI en su sistema. 1 3 9 1 3 9 1 3 9 1 3 9 1 3 9 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 140 Por favor visite el sitio Web de los proveedores para obtener las actualizaciones. 1 4 0 1 4 0 1 4 0 1 4 0 1 4 0 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 141 “Cambio en caliente” a la acción de insertar y quitar los HDDs SATA / SATAII mientras el sistema está conectado y en condiciones de funcionamiento. 1 4 1 1 4 1 1 4 1 1 4 1 1 4 1 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 142 SATA) en [AHCI]. PASO 2: Haga un Disquete de Controlador SATA / SATAII. Inserte el CD de soporte de ASRock en la unidad óptica de la unidad para iniciar el sistema. (NO inserte ningún disquete en la unidad de disco en este...
  • Seite 143 Establezca la opción “SATA Operation Mode”(Modo de funcionamiento SATA) en [non-RAID]. PASO 2: Instale el sistema operativo Windows ® 2000 / XP / XP 64 bits en su sistema. 1 4 3 1 4 3 1 4 3 1 4 3 1 4 3 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 144 64 bits en el equipo. Cuando aparezca la página “Where do you want to install Windows?” (¿Dónde desea instalar Windows?), inserte el CD de soporte de ASRock en la unidad óptica y haga clic en el botón “Load Driver” (Cargar controlador) situado en la parte inferior izquierda para cargar los controladores AHCI de NVIDIA ®...
  • Seite 145 1 4 5 1 4 5 1 4 5 1 4 5 1 4 5 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 146 Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú Principal no aparece automáticamente, localice y doble-pulse en el archivo ASSETUP.EXE para iniciar la instalación. 1 4 6 1 4 6 1 4 6 1 4 6 1 4 6 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 147 1 4 7 1 4 7 1 4 7 1 4 7 1 4 7 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 148 ‘ ’ ® ® 1 4 8 1 4 8 1 4 8 1 4 8 1 4 8 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 149 ® 1 4 9 1 4 9 1 4 9 1 4 9 1 4 9 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 150 “ ” ® ® ® ® “ 1 5 0 1 5 0 1 5 0 1 5 0 1 5 0 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 151 ® ® ® ® 1 5 1 1 5 1 1 5 1 1 5 1 1 5 1 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 152 1 5 2 1 5 2 1 5 2 1 5 2 1 5 2 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 153 1 5 3 1 5 3 1 5 3 1 5 3 1 5 3 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 154 DDRII_1 DDRII_2 DDRII_3 DDRII_4 “ ” 1 5 4 1 5 4 1 5 4 1 5 4 1 5 4 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 155 1 5 5 1 5 5 1 5 5 1 5 5 1 5 5 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 156 1 5 6 1 5 6 1 5 6 1 5 6 1 5 6 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 157 “ ” “ ” “ ” “ ” 1 5 7 1 5 7 1 5 7 1 5 7 1 5 7 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 158 1 5 8 1 5 8 1 5 8 1 5 8 1 5 8 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 159 1 5 9 1 5 9 1 5 9 1 5 9 1 5 9 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 160 ® ® ® 1 6 0 1 6 0 1 6 0 1 6 0 1 6 0 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 161 1 6 1 1 6 1 1 6 1 1 6 1 1 6 1 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 162 1 6 2 1 6 2 1 6 2 1 6 2 1 6 2 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 163 1 6 3 1 6 3 1 6 3 1 6 3 1 6 3 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 164 ® ® “ ” “ ” 1 6 4 1 6 4 1 6 4 1 6 4 1 6 4 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 165 ® ® ® ® ® ® ® ® ® 1 6 5 1 6 5 1 6 5 1 6 5 1 6 5 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 166 A. NVIDIA nForce Storage Controller (required) Windows XP/2000 B. NVIDIA nForce Storage Controller (required) Windows XP64 ® ® ® ® ® ® 1 6 6 1 6 6 1 6 6 1 6 6 1 6 6 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 167 ® ® ® ® ® ® ® ® ® ® “ ” 1 6 7 1 6 7 1 6 7 1 6 7 1 6 7 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 168 “ ” “ ” 1 6 8 1 6 8 1 6 8 1 6 8 1 6 8 ASRock ALiveNF5-VSTA Motherboard...
  • Seite 169 As soon as we have the latest driver, we will update it to our website. Please visit our website for the driver in the near future. (http://www.asrock.com) Devido a um problema com o controlador, se instalar o “All in 1 Driver” (Controlador ®...
  • Seite 170 3. After the driver installation is finished, the NVIDIA background will disappear. Please manually reboot your system. (Após concluída a instalação do controlador, o fundo NVIDIA desaparece. Reinicie o computador manualmente.) ® Windows 2000 / XP / XP 64-bit Portuguese Version ®...

Inhaltsverzeichnis