English; Product Description; Control Panel; Residual Heat Indicator - IKEA VÄLBILDAD Handbuch

ENGLISH

Product description

Control panel

5
3 2 1
Functions
3 2
Boost function
The Boost function can be used to provide extra power in a
cooking area for 5 minutes. This function is useful to boil up large
amounts of water.
Activation:
- Select one of the cooking areas.
- Press " + " until reaching level " 9 ".
- Press again to set the Boost Function.
- The corresponding digit will display
The Boost function is programmed to last for 5 minutes.
Deactivation:
- Select one of the cooking areas with the Boost Function active.
- Press " - ".
It will also deactivate automatically after 5 minutes.
Child lock
This function prevents an accidental operation of the appliance.
Confirmation is given when the digit displays
hot, then and will alternate.
Activation:
Turn the hob on, make sure that none of the cooking areas are
active.
- Press and " - " together and release.
- Press " " again.
- The cooking area digits display
Temporary deactivation:
Press button and button " - " together and release.
The function is deactivated while the hob is on. If it is turned off and
then on again, the function will still be active.
Single cooking area (160 mm) 1400W, with Booster 2100W.
Single cooking area (160 mm) 1400W, with Booster 2100W.
Control panel
Pot detection
Each of the cooking areas is equipped with a system to detect the presence of a pan.
The pan presence detection system recognises pans with a magnetisable base suitable for use
with induction hobs.
If the pan is removed during operation, or if an unsuitable pan is used, the display shows the
symbol .
5

Residual heat indicator

The residual heat indicator is a safety feature, indicating that the surface of the cooking
area is still at a temperature of 50° C or above, which may cause burns if touched by a
naked hand. The digit for the corresponding cooking area displays
5
3 2 1
4
3 2
3
4
2 3
5
1 2 3
.
3 2 1
. If an area is still
.
5
5
4
4
2 3
On/Off
1 2 3
Power level indicator
2 1 2
Button to select cooking area
Power level / Timer control
Cooking time indicator
Permanent deactivation:
Turn the hob on, make sure that none of the cooking areas are active.
4
- Press and " - " together and release.
- Press " - " again.
The function is deactivated. If the hob is turned off and then on again,
it is no longer displayed
Timer (generic)
The timer is a countdown that can be set to run for from 1 to 99
minutes. At the end of the set time a buzzer will sound, which
2 3
can be silenced by pressing any of the buttons. The cooking areas
operate independently while the timer is working.
Activation:
With the hob on, make sure that none of the cooking areas are
active.
- Press button " + " and button " - " together.
- The timer digit shows " 0 0 ".
- Set the time using " + " and " - " .
- Do not touch anything else for 10 seconds and the timer will start
to count down.When the value is " 0 0 " pressing " - " sets it to
30 minutes. Repeat these operations to modify a value that has
already been programmed.
Deactivation:
With the hob on, make sure that none of the cooking areas are
active.
- Press " + " and " - " together.
- Set " 0 0 " using " + " and " - " .
- Do not touch anything for 10 seconds.
.
4
3
.
6