Epson TM-J7000 Bedienungsanleitung Seite 13

Control Panel (LEDs and Buttons)
See illustration B.
LEDs
POWER
Lights when the power is on and is off when the power is off; flashes during
cleaning and other operations such as power-on and power-off.
Note:
Never open the printer cover or turn off the printer when the POWER LED is flashing.
ERROR
Lights when the printer is offline (when the ink cartridge is removed because the
ink is out, the roll paper is at the end, or the printer cover is open.) Off when the
printer is online. Flashes when an error occurs. (See the Troubleshooting section.)
INK OUT
Lights when the ink cartridge is not installed or ink is out. The ink cartridge needs
to be replaced. Off when the ink cartridge is installed and ink is adequate. Flashes
when the ink is nearly out. The TM-J7100 and TM-J7600 have two INK OUT LEDs,
one for the color cartridge and one for the black cartridge.
CUT SHEET
Lights when cut sheet (slip, check) is selected as print sheet. Off when roll paper is
selected as print sheet. Flashes when the printer is in the cut sheet insertion or
removal waiting state.
PAPER OUT
Lights when roll paper is out or nearly out.
Buttons
PAPER FEED
PAPER FEED feeds the roll paper or the cut sheet.
Note:
Paper cannot be fed using this button in the following cases:
•
•
•
•
CLEANING
If printing becomes faint or uneven and the INK OUT LED is not on or flashing, use
this button to clean the print head. Press the button more than 3 seconds. When
the cleaning stops, the printer is ready for normal printing.
Note:
Do not use the CLEANING button unless there is a problem with print quality.
Unnecessary cleaning will waste ink.
Downloaded from www.Manualslib.com
The printer cover is open.
Printer is in the cut sheet insertion or removal state.
When head cleaning is being performed or an error has occurred with any sheet
selected.
When check is selected as print sheet.
TM-J7000/J7100 – TM-J7500/J7600 User's Manual 5
manuals search engine
English