Button(S) Description - VINCENT solidLine CD-S5 Bedienungsanleitung

Operation
Direct selection
of a track
Stop playback
Skip to the
following track
Skip to playback
the previous track
Fast forward
Fast rewind
OPERATING THE APPLIANCE
PLAYBACK FUNCTIONS
Button(s) Description
You can start playing a track at any time by keying in the track number on
the remote control. For numbers over 10, you must press the "+10" button
Number keys as often as necessary until it shows the relevant first figure of the number
(16)
and then you key in the second figure. If there is no track of the keyed-in
number on the CD, the player switches to "STOP" mode. If the player is
paused, you cannot select any other track directly with the number buttons.
While a CD is being played, pressing this button stops the playing. If the
player was in "PAUSE" mode, this mode will also be ended by pressing the
(8)(22)
"STOP" button. The total number of tracks on the CD and the total playing
STOP
time appear in the display (1) again. This button is on both the front of the
device and the remote control.
When this button is pressed while the CD is playing, the current track
stops playing and the next track in the sequence begins to play. If this but-
ton is pressed in "STOP" mode, you can choose all the CD tracks one
(6)(29)
after the other starting from track 01. Playback can then be started again
NEXT
with the "PLAY/PAUSE" button (7)(20), with the "STOP" button (8)(22)
the player goes back to "STOP" mode. This button is located both on the
front of the device and on the remote control.
If this button is pressed once while the CD is playing, the current track
stops and the actual track starts playing from the start again. Further pres-
ses skip to playing the previous tracks in their playing sequence. If this but-
(5)(28) ton is pressed in the "STOP" mode, you can choose all the CD tracks in
BACK
reverse order starting with the last track. Playback can then be started
again with the "PLAY/PAUSE" button (7)(20). With the "STOP" button
(8)(22) the player goes back to "STOP" mode. The button is located both
on the front of the device and on the remote control.
The track will be played at higher speed (fast forward) as long as you
(21) continue to hold down this button while the CD is playing. If the button is
(FAST released, playback will continue at normal speed. If the CD play is stop-
FORWARD) ped, then this button has no function. This play function too can only be
used via the remote control.
The track will be played backwards at higher speed ("rewind") as long as
you continue to hold down this button while the CD is playing. If the but-
(23)
ton is released, play will continue at normal speed in a forward direction.
(FAST BACK)
If the CD playback is stopped, then this button has no function. This play
function too can only be used via the remote control.
Vincent
37