Button(S) Description - VINCENT tubeLine CD-200 Bedienungsanleitung

Operation
Start and pause
playback
Stop playback
Skip to the
following track
Skip to playback
the previous track
Fast forward
Fast rewind
Insert/Change the CD
OPERATING THE APPLIANCE
PLAYBACK FUNCTIONS
Button(s) Description
This button, both on the front of the device and on the remote control, starts
playing the inserted CD and the symbol " " appears on the display (3)
during play. If there is no CD inserted, "NO DISC" appears in the display
(8)(28)
and pressing the button has no effect. If the button is pressed again while a
PLAY/
CD is playing, play will be interrupted at the current position. This "PAUSE"
PAUSE
mode is indicated in the display by the symbol " ". During the pause the disc
continues to rotate and when the button is pressed play continues from this
position. The "PAUSE" function should only be used for brief interruptions.
While a CD is being played, pressing this button stops the playing. If the play-
(7)(31) er was in "PAUSE" mode, this mode will also be ended by pressing the
STOP
"STOP" button. The total number of tracks on the CD and the total playing
time appear in the display (2) again. This button is on both the front of the
device and the remote control.
When this button is pressed while the CD is playing, the current track stops
playing and the next track in the sequence begins to play. If this button is
(10)(29)
pressed in "STOP" mode, you can choose all the CD tracks one after the
NEXT
other starting from track 02. Playback can then be started again with the
"PLAY/PAUSE" button (8)(28). With the "CANCEL" button (18) the player
goes back to "STOP" mode. The button is located both on the front of the
device and on the remote control.
If this button is pressed once while the CD is playing, the current track stops
and the actual track starts playing from the start again. Further presses skip to
playing the previous tracks in reverse playing sequence. If this button is pres-
(9)(30)
sed in the "STOP" mode, you can choose all the CD tracks in reverse order
BACK
starting with the last track. Playback can then be started again with the
"PLAY/PAUSE" button (8)(28). With the "CANCEL" button (18) the player
goes back to "STOP" mode. The button is located both on the front of the
device and on the remote control.
The track will be played at higher speed (fast forward) as long as you con-
(32)
tinue to hold down this button while the CD is playing. If the button is
(FAST
released, playback will continue at normal speed. If the CD play is stop-
FORWARD)
ped, then this button has no function. This play function too can only be
used via the remote control.
The track will be played backwards at higher speed ("rewind") as long as
you continue to hold down this button while the CD is playing. If the button
(33)
is released, play will continue at normal speed in a forward direction. If
(FAST BACK)
the CD playback is stopped, then this button has no function. This play
function too can only be used via the remote control.
With this button you open and close the disc tray so that a CD can be inser-
(3)(20)
ted or removed. This button is located both on the front of the device and on
OPEN/
the remote control. If the text "OVER" appears in the display (2), then the CD
CLOSE
contains more than 16 tracks. Some of the tracks cannot then be shown in the
display's music menu.
Vincent
37