Maintenance & Storage - Makita DLM380 Betriebsanleitung

MAINTENANCE & STORAGE
WARNING:
• Always be sure that the lock key and battery cartridge
are removed from the mower before storage or
attempting to perform inspection or maintenance.
• Wear gloves when
maintenance.
CAUTION:
• Never use gasoline, benzine, thinner, alcohol or the
like. Discoloration, deformation or cracks may result.
MAINTENANCE
1. REMOVE THE LOCK KEY. Store it in a safe place
out of the reach of children.
2. Clean your mower using only mild soap and a damp
cloth. Do not spray or pour water on your mower
when cleaning.
3. Turn mower on its side and clean grass clippings
that have accumulated on the underside of mower
deck.
4. Check all nuts, bolts, knobs, screws, fasteners etc.
for tightness.
5. Inspect moving parts for damage, breakage, and
wear. Have repairs made on any damaged or
missing parts.
6. Before storing the mower, remove the battery
cartridge from it.
7. Store mower indoors in a cool, dry and locked place.
Don't store the mower and charger in locations
where the temperature may reach or exceed 40°C
(104°F).
Storage (Fig. 23, 24 & 25)
WARNING:
• When carrying or storing the mower, hold both the
handle and front grip of the mower. Only holding the
handles may cause a serious injury or damage to the
mower.
1. Loosen the clamping screw, expand the lower
handle to both sides and then move down the
handle forward. At this time, keep a firm grip on the
front grip so that it does not fall down to the far side
from the tool.
2. Loosen the clamping nut and pivot the upper handle
back.
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
performing inspection or
11