Care And Cleaning Information - König+Neurath ACTIVE.T Bedienungsanleitung

CARE AND CLEANING INFORMATION

Plastic-coated and metal surfaces:
Clean the surface with a duster. Use warm water and/or
a mild cleaner to remove marks, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause
permament visible damage.
Natural wood finishes:
Wipe the surface with a duster, Use a damp cloth and a
neutral cleaning agent to remove soiling, then wipe dry.
Caution: Do not use abrasive cleaners! This can cause
permanent visible damage. Avoid direct exposure of the
natural wood finish to high temperatures and moisture.
Please note that the natural wood finish can change
colour over time if exposed to UV rays. This is a natural
ageing process of the wood.
Control panel:
Always keep the control panel and plug connectors free
of dust deposits! Clean the control system and control
panel with a dry, soft cloth.
No liability is accepted for damage to the
NOTE
finish caused by incorrect cleaning.
55