Savind Desktop Position; Retrieving A Saved Position - König+Neurath ACTIVE.T Bedienungsanleitung

SAVING DESKTOP POSITION
(only control panel with memory function)
Move the desk, using UP- or DOWN-button, to the
desired position.
Press the LOGO-button below the display.
The display shows P_ . The light strips flash.
Press a MEMORY-button (for example 1).
The Display shows P_1 .
The saving process is completed. After approx. 2 se-
conds the current altitude is shown on the display again.
In this way 4 different positions can be saved. The saved
positions cannot be deleted. A saved position can be
overwritten.
No positions can be saved below an existing
NOTE
container stop.

RETRIEVING A SAVED POSITION

Press the button of desired position (1, 2, 3 or 4), the
desk moves independently from the current position
to the saved position.
The button must be pressed until the position
NOTE
is reached, if the button is released prematu-
rely, the desk stops.
. . .
P_1 P_1 P_1
43