F 3 Reset The Control Box - König+Neurath ACTIVE.T Bedienungsanleitung

F 3 RESET THE CONTROL BOX

To reset the control to factory settings, proceed as
follows:
Press the LOGO-button below the display.
If necessary, use the If necessary, use the If necessary, use the If necessary, use the UP- and DOWN-button to naviga-
te to menu item 3. F 3 must appear in the display.
te to menu item 3. te to menu item 3. te to menu item 3.
Confirm the selection by pressing the LOGO-button
again.
The display shows 000 .
Press the LOGO-button again.
All settings are reset to factory settings. The menu is All settings are reset to factory settings. The menu is All settings are reset to factory settings. The menu is All settings are reset to factory settings. The menu is
automatically exited and the display shows C38 .
Finally, carry out a reference run (reset).
must appear in the display. must appear in the display. must appear in the display.
.
. . .
47