Set And Delete Container And Shelf Stop - König+Neurath ACTIVE.T Bedienungsanleitung

SET AND DELETE CONTAINER AND SHELF STOP

(CONTROL PANEL WITHOUT MEMORY)
Container and shelf stops are safety positions that
cannot be run over during normal operation, so that
collisions with known, permanently present hindrances
can be prevented. The container stop limits the move-
ment height downwards (minimum height) and can be
used if there are limiting factors below the desk, for
example, a pedestal. The shelf stop limits the movement
height of the desk upward. The shelf stop can be used if
there are limiting factors above the desk, such as a
shelf.
Only trained personnel should carry out setting
and deletion of container and shelf stops. There
is a danger of injury from wrong setting or remo-
val of the Stop positions, and a danger of the desk
getting destroyed.
40