Selecting A Timer - Blaupunkt San Francisco CD72 Bedienungsanleitung

➮
Move the joystick 7 up or down to
adjust the minutes.
To save the settings,
➮
press the TUNER button < or the
joystick OK 7.
The settings are saved.
During TIM standby, a con-
nected electric aerial will remain ex-
tended.
Note:
Before you drive into a carwash,
●
please make absolutely sure you
switch off TIM. For further details,
read the section entitled "Switching
off TIM" in this chapter.

Selecting a timer

Once you have adjusted the timers, you
can choose between the two timers. The
timer that you set last is always the one
that is active.
To select a timer,
➮
press the TUNER button < in ra-
dio mode.
➮
Press the softkey 4 assigned to
the "TIM" display item.
The TIM menu is displayed.
➮
Press the softkey 4 assigned to
the "SET" display item.
➮
Press the softkey 4 assigned to
the "REC1" display item to select
the first or "REC2" to select the
second timer.
"RECORD" and the set time appear in
the display.
➮
Press the TUNER button < or the
joystick OK 7.
The settings are saved.
TIM
9