Siemens SIMATIC Ident Funktionshandbuch Seite 59

Ergebnisse
Tabelle 4- 40 ATTRIBUTE "0x04" (Datentyp "IID_TAG_STATUS_04_RF300")
Name
reserved
status_info
UID
MDS_type
Lock state
Reserved1
Tabelle 4- 41 ATTRIBUTE "0x82" (Datentyp "IID_TAG_STATUS_82_RF300")
Name
reserved
status info
UID
LFD
FZP
FZA
ANWZ
reserved1
Tabelle 4- 42 ATTRIBUTE "0x83" (Datentyp "IID_TAG_STATUS_83_ISO")
Name
reserved
status info
UID
MDS_Type
IC version
size HB
size_LB
lock state
block_size
number_of_block
Ident-Profil, Add-On Instruction für Rockwell-Systeme
Funktionshandbuch, 07/2020, C79000-G8900-C410-04
Typ Kommentar
SINT
SINT Tag status mode
SINT[8]
SINT Type of Tag
0x01 = Tag without FRAM; 0x02 = Tag with FRAM 8K;
0x03 = Tag with FRAM 32K; 0x04 = Tag with FRAM
64K; 0x05 = Tag with FRAM 128K; 0x06 = Tag with
FRAM 256K
SINT Write Protection Status EEPROM
SINT[6]
Typ Kommentar
SINT
SINT Tag status mode
SINT[8]
SINT Magnetic flux density: correlation between limit-
value
SINT Error counter passive: distortion without commu-
nication
SINT Error counter active: distortion during communi-
cation
SINT Presence counter: measure value for presence time
SINT[3]
Typ Kommentar
SINT
SINT Tag status mode
SINT[8]
BYTE Type of Tag
0x00 = unknown; 0x03 = ISO: MDS D3xx, Infineon;
0x04 = ISO: MDS D4xx, Fujitsu; 0x05 = ISO: MDS
D1xx, NXP; 0x06 = ISO: MDS D2xx, TI; 0x07 = ISO:
MDS D261, STM; 0x08 = ISO: MDS D5xx, Fujitsu -
8k; 0x11 = RF300 - 0k; 0x12 = RF300 - 8k; 0x13 =
RF300 - 32k; 0x14 = RF300 - 64k; 0x21 = MIFARE
Classic - 1k, NXP; 0x22 = MIFARE Classic 1k, In-
fineon; 0x23 = MIFARE Classic 4k, NXP; 0x41 (A) =
P2P RF310R Gen2; 0x42 (B) = P2P RF340R Gen2; 0x43
(C) = P2P RF350R Gen2; 0x44 (D) = P2P RF380R Gen2
SINT Chip version
SINT Size of Memory (high Byte)
SINT Size of memory (low Byte)
SINT Write protection status EEPROM
SINT Size of a block in addressable memory
SINT Number of blocks in addressable memory
Parametrieren der Anweisungen
4.5 Anweisungen programmieren
59