Tag_Status - Siemens SIMATIC Ident Funktionshandbuch

Name
reader_type
hardware_error
reserved
Tabelle 4- 38 ATTRIBUTE "0x89" (Datentyp "IID_READSTAT_89_RF600") kompatibel mit RRF61xR/F68xR
Name
status_info
hardware version
firmware version
config ID
inventory_status
sum of filtered tags
filtered smoothing
filtered blacklist
filtered data-filter
filtered RSSI threshold
filtered_RSSI_delta
4.5.4.2

Tag_Status

Die Anweisung "Tag_Status" liest die Statusinformationen des Transponders aus. Für
die verschiedenen Transponder-Typen und Reader-Familien gibt es unterschiedliche
Status-Modi, die Sie über den Parameter "ATTRIBUTE" auswählen können.
Bild 4-21
Ident-Profil, Add-On Instruction für Rockwell-Systeme
Funktionshandbuch, 07/2020, C79000-G8900-C410-04
Typ Kommentar
SINT Type of connected reader
0 = RF310R, RF340R, RF350R; 1 = RF380R, RF260R; 2
= RF310R (ISO), RF210R, RF220R; 3 = RF380R (ISO),
RF240R; 4 = RF340R (ISO), RF350R (ISO), RF250R; 5
= RF310R (ISO); 8 = MV400/MV500; A = RF310R Gen2,
RF290R; B = RF340R Gen2; C = RF350R Gen2; D =
RF380R Gen2; M = RF280R RS422; N = RF280R RS232
SINT Hardware error
SINT Reserved
Typ Kommentar
SINT Reader status mode(Subcommand)
SINT Version of hardware
SINT[4] Version of firmware
DINT Unix timestamp
INT 0 = inventory not active; 1 = inventory active; 2
= presence mode active
INT All filtered Tags
INT Filtered Tags trough Smoothing
INT Filtered Tags trough Blacklist
INT Filtered Tags trough Data-Filter
INT Filtered Tags trough RSSI Threshold
INT Filtered Tags trough RSSI Delta
Anweisung "Tag_Status"
Parametrieren der Anweisungen
4.5 Anweisungen programmieren
57