Functional Test; Prerequisites - AWG S2/M2 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
6

FUNCTIONAL TEST

6.1

Prerequisites

All testing of the AWG Foam nozzles S2/M2 and S4/M4 must be car-
ried out in accordance with the manufacturer's technical documenta-
tion and must be documented if necessary.
The following inspections are defined for the foam nozzles:
– Mandatory BASIC Inspection after each use
– Mandatory STANDARD Inspection every 12 months
– Optional ADVANCED Inspection every 12 months
The STANDARD and ADVANCED inspections may only be carried out
by qualified personnel who have been trained for these inspections:
– Firefighters who have received training as firefighting equipment
maintenance technicians or persons with equivalent qualifications
– or, if desired, directly by the manufacturer
Inspection by the manufacturer
AWG Fitting GmbH offers an inspection as part of its service offering.
Send us the foam nozzle and you will receive the inspected device
back by the agreed date. You will find a return delivery form on our
website www.awg-fittings.com. If required, a rental device can also be
provided.
Documenting the inspection result
To meet the requirements for occupational safety and acci-
dent prevention, the test results for each test must be doc-
umented. Please observe the country-specific regulations.
In Germany, the guidelines of the DGUV (Deutsche Gesetz-
liche Unfallversicherung e.V. [German Statutory Accident
Insurance]) apply. A product specific test chart in accord-
ance with the DGUV can be downloaded from www.awg-
fittings.com
– Keep the documented test result as proof.
34 / 40
Low expansion foam nozzles S1, S2, S4, S8
ENGLISH
FUNCTIONAL TEST
M1108B10 I Rev. 02-03/20