Handling - AWG S2/M2 Originalbetriebsanleitung

AWG I Operating manual I Fittings I
Use of different foam agents
Foam agents from different manufacturers and different
products or types must not be mixed. Applied extinguishing
foams are compatible without any problems.
5.2

Handling

1 Water hose adapter
2 Fixed coupling
3 Hand lever
Fig. 2 Handling
Required flow pressure
The foam nozzle is designed for a flow pressure on the inlet
side of 3 to 5 bar for medium expansion foam and 3 to
10 bar for low expansion foam. Within this range, optimum
foaming is achieved.

The water hose for connection to the fixed coupling of the foam
nozzle is ready at hand.
 The hand lever is closed (Fig. 2/B).
M1108B10 I Rev. 02-03/20
Adjustable foam nozzles S2/M2, S4/M4
4
5
6
ENGLISH
Pressure gauge
Selection lever
Foam tube
USE
31 / 40