Permissible mounting positions
As a rule, installation of the floodlight is only permissible at locations where the
effect of additional heat or cold sources can be ruled out. Installation is only
permissible in positions in which the individual modules are aligned as shown in
Figure 1
.
Figure 1 Approved mounting positions
Fastening
Vibration-proof assembly of the floodlight must be realised using two bolts M12. A
washer ISO 7093 - 12 must be fitted below the nut or below the screw head for
this.
Figure 2 Fastening
7179763200 / Index 00 / DCN 21433
02.12.2014
de
en
fr
tr
el
es
pt
da
nl
no
sv
pl
cs
hu
Seite 13 von 26