Victron energy MPPT 150/70-Tr VE.Can Anleitung Seite 25

Specifications, 150V models
SmartSolar charge
controller
Safety
1a) If more PV power is connected, the controller will limit input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start.
Thereafter the minimum PV voltage is Vbat + 1V.
2) A higher sort circuit current may damage the controller in case of reverse
polarity connection of the PV array.
3) Default setting: OFF
Specifications, 250V models
MPPT 150/70
ENCLOSURE
STANDARDS
EN/IEC 62109-1, UL 1741, CSA C22.2
23
150/85 150/100