Pkm 9040/60 BZ Bedienungsanleitung Seite 30

3. Drill two 8 mm holes to install bracket 2. Fasten bracket 2 on the wall using the
2 provided screws.
4. Fix the chimney using the two screws.
1 4*8 mm screws
5. Insert the grease filters and connect the appliance to the mains
 Check the correct position of the hood from front and side perspective.
Otherwise the appliance will not work properly.
If the socket is covered by the chimney, you must plug in the appliance at an
3
earlier point in
time.
1 Bracket 2
2 4*30 mm screws + dowels
30
3 .