CONNECTION SCHEMATIC
audio
(red)
To +/-12V
power supply (or car ignition)
CONNECTIONS / INPUTS & OUTPUTS
A/V Interface (Black Box): The ZENEC ZEM-W700U comes with an A/V interface
blackbox, that features the following in- and ouputs:
e Extension lead with 6-pin pc-plug for connection of the TFT monitor
e A red* and a black power supply wire to be connected to the on board voltage of the
vehicle. The red wire with inline fuse holder should be connected to the ignition of the
vehicle, to avoid unnecessary current drain when the vehicle is not in use.
e Two separate RCA output plugs (red and yellow), to connect a video source (DVD
headunit) and a mono audio signal.
* the read power wire features an inline fuse holder – the correct fuse rating is 250V/2A –
only use the correct fuse rating or the monitor and the video electronics could be
damaged!
Downloaded from
www.Manualslib.com
video
(yellow)
AV-
In-line fuse
red
Interface
black
manuals search engine
DVD-Headunit
6-pin
connector
4
7" TFT MONITOR