Appliance Description; Operation; Connection To The Mains - Beko CHA33100S Gebrauchsanweisung

GB

Connection to the mains

Your appliance is designed to operate at a
monophase voltage of 220-240V/50 Hz.
Before plugging in the appliance, please make
sure that the parameters of the electric
network in your house (voltage, current type,
frequency) comply with the operation
parameters of the appliance. The information
concerning the supply voltage and the
absorbed power are specified on the rating
label placed inside, on the lateral side, which
is visible after pulling out the crisper.
The electric installation must comply
•
with the legal requirements.
The plugging in of the appliance to an
•
electric network with earthing is
compulsory by the law.
The manufacturer has no responsibility for
any damages related to persons, animals
or destruction of goods, caused by the
non-observance of the specified
conditions.
The appliance is endowed with a supply
•
cord and a plug (European type, marked
10/16A) with double earthing contact. If
the plug is not the same type with the
socket, please ask a specialised
technician to change it.
It is advisable not to plug in the
•
appliance to the mains by means of an
extension piece or adapter. If necessary,
assemble a longer supply cord but having
the same features with the one supplied
with the product.
If the appliance is located between two
•
pieces of furniture, please make sure that
they are not placed on the supply cord or
press it.
Disconnection from the mains
The disconnection must be posible by
taking out the plug from the socket or by a
double-pole switch located before the
socket.
Downloaded from www.Manualslib.com manuals search engine
Instruction for use

Appliance description

(Item 1)
1 - Signalling, display and adjustment control
panel
2 - Lamp for inside lighting
3 - Fan
4 - Adjustable Cabinet shelves
5 - Wine bottles support
6 - Defrost water collection chanel - Drain tube
7 - Crisper cover
8 - Crispers
9 - Ice tray support and ice tray
10 - Fast Freeze compartment
11 - Freezer drawers
12 - Adjustable front feet
13 - Dairy shelf
14 - Door shelf
15 - Keeping cup
16 - Bottle shelf

Operation

Before the first operation, clean the inside of
the appliance (read the chapter „Appliance
maintenance and cleaning").
After finishing this operation, plug in the
appliance, open the door of the refrigerator
(the inside lamp will go on) and adjust the set
temperature value on an average position set
value 4 or 5.
When the cabinet is first time on or after one
power interruption the self test is initiated,
what is mean that all the components are
sequentely started one-by-one. After the self
test the components (compressor, heaters,
fans) are started according with the setings
with posiblle delays.
After finishing the tests, the component
parts of the appliance will be activated
according to the set temperature value,
and there is the possibility that some of
them have certain delays.
Let the appliance operate for about 4 hours
without putting food inside.
The freezeing of fresh food is possible after
min. 12 hours of operation.
4