Ending The Appliance Self-Test; Customer Service; Repair Order And Advice On Faults - Bosch KSV-Serie Gebrauchsanleitung

en
Appliance self-test
Your appliance features an automatic
self-test program which shows you
sources of faults which may be repaired
by customer service only.
Starting the appliance self-test
Fig. "
1. Switch off the appliance with the On/
Off button 1 and wait 5 minutes.
2. Switch on the appliance with the On/
Off button 1 and hold down
the temperature setting button 4 for 3-
5 seconds within the first 10 seconds
until 2 °C is lit on the temperature
display 2.
The self-test programme starts, when
the temperature displays lit up in
succession.
When after a short time the appliance
displays the set temperature prior to the
self-test, everything is ok.
If the super display 3 flashes for 10
seconds, an error has occurred.
Inform customer service.

Ending the appliance self-test

When the programme has ended, the
appliance switches over to normal
operation.
34

Customer service

Your local customer service can be
found in the telephone directory or in
the customer-service index. Please
provide customer service with the
appliance product number (E-Nr.) and
production number (FD-Nr.).
This information can be found on the
rating plate. Fig. /
To prevent unnecessary call-outs, please
assist customer service by quoting
the product and production numbers.
This will save you additional costs.
Repair order and advice
on faults
Contact information for all countries can
be found on the enclosed customer
service list.
GB 0344 892 8979
IE 01450 2655
US 800 944 2904
Calls charged at
local or mobile rate.
0.03 € per minute
at peak. Off peak
0.0088 € per
minute.
toll-free