English - Kenwood AX643 Bedienungsanleitung

English

Use the roto food cutter to slice and to assemble your
shred such foods as carrot,
roto food cutter
cucumber, cabbage, apples, potato
and cheese.
assembly
before using your Kenwood
1 Select a drum. The drums are
attachment
numbered at the back and used as
G Read these instructions carefully and follows:
retain for future reference.
G Drum No 1 - For fine shredding :-
G Remove all packaging. chocolate, nuts, carrot and cheese.
G Drum No 2 - For coarse
safety
shredding :- chocolate, nuts, carrot
and cheese.
Never put your fingers in the feed
G
G Drum No 3 - For thin slicing :-
tube. Only use the pusher supplied
onion, cabbage, cucumber, carrot,
with the roto food cutter attachment.
apples, potato and chocolate.
G Do not use excessive force to push
Drum No 4 - For thick slicing :-
G
the food down the feed tube - you
onion, cabbage, cucumber, carrot,
could damage your attachment.
apples, potato, chocolate and
G Handle the drums with care, they are
beetroot.
extremely sharp.
G Drum No 5 (Rasping drum) -
G Do not touch moving parts.
For grating parmesan cheese and
Unplug the appliance before fitting or
G
potato for German potato
removing parts or cleaning.
dumplings.
Refer to your main Kitchen Machine 2 Fit the drum into the body of the
instruction book for additional safety roto food cutter.
warnings. 3 Lock the drum retainer in position by
turning anti-clockwise until the
G This appliance conforms to EC
locating line is directly underneath
directive 2004/108/EC on
the line on the body
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
to use your
27/10/2004 on materials intended
roto food cutter
for contact with food.
1 Remove the outlet cover by pressing
before using for the first time
its top then lifting off
1 Wash the parts: see 'Cleaning'.
2 With the roto food cutter in the
position shown
key
outlet. Rotate the roto food cutter so
that the feed tube is upright.
pusher
3 Place a collecting vessel beneath the
feed tube and body
outlet.
drum retainer
4 Fill the feed tube to prevent food
drums
from slipping sideways during
processing. Switch onto speed 3 - 4
and gently push down with the
pusher. Note: The pusher will only fit
one way.
2
.
.
, locate in the