Unit Toggling Parameters "Unit / Accuracy - Sartorius Entris II BCA64-1 Serie Betriebsanleitung

Parameters Settings
Optimize Automatic*
Off
* Factory setting
Parameters of the "Pipette Test" Application
Parameters Settings
Print On*
component
Off
Apply Automatic
Manual*
* Factory setting

4 . 1 1 . 1 9 Unit Toggling Parameters "Unit / Accuracy"

Parameters Settings
Unit g*, kg, ct, lb,oz,
ozt, tlh, tlt,
GN, dwt, mg, /
lb, tlc, mom,
Kt, tol, bat,
MS, N
Accuracy All digits on
Last digit off
* Factory setting
Explanation
Activates the automatic reference sample updating . The average piece weight is
recalculated every time the reference sample is updated automatically . The basis
for the calculation is increased every time a new sample is placed . This increases
the counting accuracy of the reference and with it the result .
Deactivates automatic reference sample updating .
Explanation
Activates the component printout .
Deactivates the component printout .
Automatically saves the weight value .
Saves the weight value after manual confirmation .
Explanation
Defines the unit of the weight value .
Shows all available decimal places .
Does not show the last available decimal place .
Operating Concept
Entris II Advanced Line Operating Instructions
®
33