Inhaltsverzeichnis
Werbung
Configure DRAM Timing by SPD
Selects whether DRAM timing is controlled by the SPD (Serial Presence Detect)
EEPROM on the DRAM module. Setting to [Auto By SPD] enables DRAM timings and
the following related items to be determined by BIOS based on the configurations on
the SPD. Selecting [Manual] lets users configure the DRAM timings and the following
related items manually. Setting options: [Manual], [Auto By SPD], [Turbo], [Ultra].
Memory Hole
In order to improve performance, certain space in memory can be reserved for ISA
peripherals. This memory must be mapped into the memory space below 16MB. When
this area is reserved, it cannot be cached. Settings: [Disabled], [15MB-16MB].
Int. Gfx Memory Size Select
The field specifies the size of system memory allocated for video memory. Setting
options: [Disabled], [Enabled, 1MB], [Enabled, 4MB], [Enabled, 8MB], [Enabled, 16MB],
[Enabled, 32MB].
Aperture Size Select
This setting controls just how much system RAM can be allocated to PEG (PCI Ex-
press Graphic) for video purposes. The aperture is a portion of the PCI memory
address range dedicated to graphics memory address space. Host cycles that hit the
aperture range are forwarded to the PEG without any translation. The option allows
the selection of an aperture size of [128MB], and [256 MB].
PEG Port
This item enables or disables the PEG (PCI Express Graphic) port function. Setting
options: [Enabled], [Disabled].
Downloaded from
www.Manualslib.com
Advanced Chipset Features
MSI Reminds You...
Change these settings only if you are familiar with the chipset.
manuals search engine
BIOS Setup
E-3-5
Werbung
Inhaltsverzeichnis
