Using Your Microphone; Introduction; Mounting The Microphone - AKG MicroMic C516 ML Bedienungsanleitung

4. Slide the adapter with the transmitter on the
5. Press the adapter against the mounting plate
6
6. Coil the connecting cable and tuck it under the
Before permanently mounting the microphone on
your instrument or speaker cabinet, experiment
with various microphone positions to get the best
possible sound. Fix the microphone temporarily
using the supplied adhesive putty.
Step 1: Fix the H 516 installation plate on your in-
strument or speaker cabinet (see a, b, or c below).
AKG C 516 ML
Downloaded from www.Manualslib.com
clip engage the locating holes in the transmit-
ter case to hold the transmitter in place.
shaft (3) on the mounting plate (4).
(4). The adapter will lock with an audible click.
fixing clip.
manuals search engine
2 Interfacing

3 Using Your Microphone

Refer to fig. 3
on page 18.
Fig. 4: Coiling and
stowing the con-
necting cable.
Refer to fig. 4.

3.1 Introduction

For more applica-
tion hints refer to
sections 3.3 to 3.5.
3.2 Mounting
the Microphone
19