Cameo OPUS H5 Bedienungsanleitung Seite 9

MAIN DISPLAY DMX AND W-DMX OPERATING MODE
The top line of the display shows whether a control signal is available at the device, the middle field shows the DMX start address, the DMX
mode and the address following the start address set in the device, corresponding to the number of channels of the DMX mode. The bottom
line displays the device head temperature, lamp mode and W-DMX status.
As soon as the control signal is interrupted, the characters in the display start flashing and "None" is shown after "Controlled by" in the top
line (no signal); when the control signal is available again, the flashing stops.
Control signal display
Tap -> main menu
DMX start address
DMX mode
Following DMX start address
Temperature of the device head
The fields marked grey in the figure are control panels with direct access to the corresponding menu item.
MAIN DISPLAY ART-NET AND SACN OPERATING MODE
The top line of the display shows whether a control signal is available at the device, the middle field shows the operating mode, the DMX
start address, the DMX mode and the address following the start address set in the device, corresponding to the number of channels of the
DMX mode. Below this, the DMX universe, IP address and subnet mask are displayed.
The bottom line displays the device head temperature, lamp mode and W-DMX status. As soon as the control signal is interrupted, the
characters in the display start flashing and "None" is shown after "Controlled by" in the top line (no signal); when the control signal is
available again, the flashing stops.
Control signal display
Tap -> main menu
Operating mode
DMX start address
DMX mode and following
DMX start address
Universe
IP address
Subnet mask
Temperature of the device head
The fields marked grey in the figure are control panels with direct access to the corresponding menu item.
Lamp mode
Lamp mode
Lamp – tap for direct access to menu item
Settings / Lamp
Warning triangle – the warning triangle is
displayed in the event of malfunction. Tap
for further information
W-DMX status
Lamp – tap for direct access to menu
item Settings / Lamp
Warning triangle – the warning triangle
is displayed in the event of malfunction.
Tap for further information
W-DMX status
9