Cameo OPUS H5 Bedienungsanleitung Seite 21

1 Fully disconnect the spotlight from the mains (pull out the plug)!
Loosen the two bayonet screws on the rear head cover (quarter turn counter clockwise) and remove the cover from the spotlight head.
2
In doing so, take care not to damage the cover's protective earth cable.
Disconnect the two cables for power supply to the lamp from the contacts at the connectors.
3
4 Press the lamp against the socket and turn it counter clockwise out of the socket (one eighth turn).
5 The lamp can now be removed from the socket.
3
When inserting the new bulb, proceed in reverse order and make sure that the bulb is firmly seated in the socket. Plug the power supply
6
cables back onto the lamp contacts and make sure that they are firmly in place (no polarity reversal possible). Never operate the spotlight
without a head cover.
4
6
2
5
21