This manual contains safety and operating instructions. Read it carefully before using the device for the first time and
keep it in a safe place for future reference.
SAFETY
- Do not use to charge non rechargeable batteries.
- If damaged, the power supply cable will need to be replaced.
- Do not cover the device whilst using it.
- Do not store or use the device in a room where the temperature is above 70°C.
- Do not modify of dissassemble the product.
- Protect against rain and moisture.
- This product should be disposed of at an appropriate recycling facility. Do not dispose of in domestic waste.
This device is not intended for use by persons (including children) with reduced physical or mental capabilities, or lack
of experience and knowledge, unless they have been given by a person responsible for their safety, supervision or ins-
tructions concerning the use of the device. Children must no play with the product. Cleaning and maintenance should
not be performed by unsupervised children.
- The device must be positioned so that the socket is always accessible.
OPERATION
Indicators
Lights
Internal battery
capacity for the
device
Indicators flash in turn, whilst charging the device. The number of indicators ON indicates the capacity of the NOMAD
POWER internal battery. All lights are steady if the battery is on hold or the charge is complete.
!
RECHARGE THE NOMAD POWER before first use and after each use.
INTERNAL BATTERY CHARGING
OR
OR
not supplied
6
NOMAD POWER 10
Press the ON/OFF button
1 flashing
1 steady
0%
25%
1 - Connect mains adaptor to domestic mains.
2 - Connect the other end to the NOMAD POWER
1 - Connect car adaptor to the car cigarette lighter socket.
2 - Connect the other end to the NOMAD POWER
1 - Plug the USB cable to a charger with a USB output (not supplied)
2 - Plug the other end to the NOMAD POWER
to check internal battery level of the NOMAD POWER.
2 steady
50%
3 steady
4 steady
75%
100%
to start the charge.
to start the charge.
to start the charge.
EN