Dust/Chip Extraction; Starting Operation - Bosch PSR 10,8 LI Originalbetriebsanleitung

OBJ_BUCH-1400-003.book Page 33 Tuesday, June 18, 2013 9:33 AM
Open the keyless chuck 2 by turning in rotation direction , until the tool
can be inserted. Insert the tool.
Firmly tighten the collar of the keyless chuck 2 by hand in rotation direc-
tion  until the locking action ("click") is heard. This automatically locks
the chuck.
The locking is released again to remove the tool when the collar is turned
in the opposite direction.

Dust/Chip Extraction

 Dusts from materials such as lead-containing coatings, some wood
types, minerals and metal can be harmful to one's health. Touching or
breathing-in the dusts can cause allergic reactions and/or lead to res-
piratory infections of the user or bystanders.
Certain dusts, such as oak or beech dust, are considered as carcino-
genic, especially in connection with wood-treatment additives (chro-
mate, wood preservative). Materials containing asbestos may only be
worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the materials to be
worked.
 Prevent dust accumulation at the workplace. Dusts can easily ignite.
Operation

Starting Operation

Reversing the rotational direction (see figure C)
The rotational direction switch 7 is used to reverse the rotational direction
of the machine. However, this is not possible with the On/Off switch 8 ac-
tuated.
Right Rotation: For drilling and driving in screws, push the rotational di-
rection switch 7 left to the stop.
The indicator for right rotation 4 lights up when the On/Off
switch 8 is actuated and the motor is running.
Left Rotation: For loosening or unscrewing screws, push the rotational
direction switch 7 right to the stop.
Bosch Power Tools
English | 33
1 609 92A 0A0 | (18.6.13)