Removing The Seat Cover - Kidwell LYNX FOSALYN01A3 Benutzerhandbuch

18
a. The shoulder belt should go through the upper guiding hook for
group II (pic. 1) and the lower harness guide for group II (pic. 3)
where it meets with the hip belt.
b. The hip belt should go through the harness guide for group II
(pic. 2) and after that, it should join the shoulder belt in harness
guide on the other side (pic. 3)
c. Make sure that the 3-point safety belt is properly tightened and
secured with the buckle

REMOVING THE SEAT COVER

19
a. Remove the 5-point safety belts (see 5-point safety belt
removal on previous pages). WARNING: do not lose any
small elements like the belt clasps. If the seat in incomplete
in cannot be used
b. The seat cover is stretched tight on the seat frame, this
means it needs to be pulled slightly around harness elements
and belt guides to be released.
c. The side protection system has its own fabric cover. To
remove just pool gently
To put the seat cover fabric back on the seat frame just follow the
above steps but in reverse
ENVIRONMENT
For environmental reasons, when you have stopped using this product,
we ask that you dispose of the product in the proper waste facilities in
accordance with local legislation.
37