out from the front of the seat. Find the correct height and connect the
belts following the steps 1/2/3/4/5 in reverse order
16
CAUTION: When adjusting belt height make sure that the belts are
not twisted.
CAUTION: To adjust the head cushion simply pull upwards or push
down
5-POINT SAFETY BELT REMOVAL
17
1.
To remove the 5-point safety belt, adjust the backrest to the
lowest position - level 4.
2.
Loosen the seat belts with the central adjuster (see schematics
fi g. 13)
3.
Under the seat, there is a red frame which regulates the
backrest. Behind it, there is a clasp that needs to be removed.
4.
In order to take out, the shoulder belts follow step 1/2/3 from
the "5-point safety belt regulation"
INSTALLATION FOR GROUP II
(weight 15-25kg)
WARNING:
•
The installation for group II is forward facing
•
For group II there is only one level of backrest incline that should
be used – level 1
•
When using installation method for group II the safety seat
should have the 5-point safety belt and the reduction cushion
removed
IMPORTANT:
•
3-point harness safety belt are the only belts that should be used
in this installation
36