Removing The Seat Cover; Cleaning And Maintenance - Kidwell ORBIT Benutzerhandbuch

REMOVING THE SEAT COVER

17
A. Unfasten the 5-point Harness System (see Chapter 3: UNFASTENING THE
5-POINT HARNESS SYSTEM).
B. ATTENTION: Do not lose any parts, every component is necessary for correct
functioning of the safety seat.
C. After unfastening the 5-point Harness System, remove the reduction cushions. Two
buttons connect the headrest reduction cushion to the seat cover.
D. The seat cover is fi xed on the safety seat frame and kept in place through the use
of hook and loop fasteners.
In order to put the seat cover on the safety seat in reverse follow the steps which are
outlined above in this chapter

CLEANING AND MAINTENANCE

18
Clean only with the use of neutral detergents and warm water. Do not tumble-dry. Do not
use strong detergents (e.g. bleach). Do not iron.
A. Soft, damp cloth can be used to clean the plastic parts of the safety seat.
B. This product demands systematic maintenance.
C. Cleaning and maintenance must be carried out by an adult.
D. Friction of the moving parts of the safety seat with other parts could damage the
safety seat. For this reason, make sure that these moving parts are clean and there
is no dirt, dust or sand inside them.
E. Pay attention to whether there any broken, torn or missing parts belonging to the
safety seat. If any of the parts seem broken, torn or missing, instantly stop using the
safety seat.
F. Pay attention to whether the fabric and the seams are in good condition every time
you clean the safety seat.
G. Prolonged exposure of the product to direct sunlight, high temperatures or other
weather conditions could cause deformation of the parts, fading or discoloration of
the fabric, the design and the patterns. More information on this can be found on
the labels directly attached to the product.
ENVIRONMENT
For environmental reasons, we kindly ask of the disposal of this product at a specifi cally
for this purpose designed disposal site which is in accordance with local legislations.
The pictures are for reference only. The real design of the product may diff er from the
pictures presented.
0+
MAX
36kg
41