Hitachi CV-400PRO Bedienungsanleitung Seite 23

CARE OF HEPA CLEAN FILTER
5
Once or twice a year, or when it becomes
visibly soiled, the motor protection filter located
under the upper case may require cleaning.
• Remove the set of HEPA CLEAN FILTER
which is composed of HEPA COVER cq
and HEPA CLEAN FILTER cr from
MOTOR BASE cs by pulling the lock as
show in illustration.
• Remove HEPA CLEAN FILTER cr from
HEPA COVER cq for cleaning.
• Clean HEPA FILTER by shaking it to
remove dust. Do not wash.
• Assembly the set of HEPA CLEAN FILTER.
Attach HEPA CLEAN FILTER cr to
HEPA COVER cq first, then fix with
MOTOR BASE cs by locking the latch
of HEPA COVER cq into the position
of HEPA GUARD ct .
6
The above mark is in compliance with the Waste Electrical and
Electronic Equipment Directive 2002/96/EC (WEEE).
The mark indicates the requirement NOT to dispose the equipment
including any spent or discarded batteries as unsorted municipal
waste, but use the return and collection systems available. If the batteries or
accumulators included with this equipment display the chemical symbol Hg, Cd,
or Pb, then it means that the battery has a heavy metal content of more than
0.0005% Mercury, or more than 0.002% Cadmium, or more than 0.004% Lead.
CAUTION:
If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualifi ed person in order to avoid a hazard.
RoHS Directive 2011/65/EU conforms with the protection requirements of
council directives 93/68/EEC and 2004/108/EC relating to electromagnetic
compatibility and 93/68/EEC and 2006/95/EC relating to the Low Voltage
Directive.
cq
cs
cr
ct
cq
cr
cq
ct
cs
11