Philips BT9290/32 Bedienungsanleitung Seite 8

English
8
, After about 3 minutes the bottom battery light flashes white only.
At this point the battery contains enough energy for one cordless
trimming session.
When the charging process continues, more lights start flashing to
,
show that the charge level of the battery increases.
, When the appliance is fully charged, all battery lights light up solid
white.
If the appliance is still connected to the mains when it is fully charged, the
battery lights go out after 30 minutes.
Battery low and battery empty signals
, When the battery is almost empty, the bottom battery light starts
flashing orange. When you switch off the appliance, the bottom
battery light continues to flash orange for a few seconds.
The battery light at the bottom of the appliance flashes orange at a
,
higher frequency when the battery is empty and if you:
- press the on/off button
- turn the zoom wheel
- activate the laser guide
corded trimming
You can also operate the appliance from the mains.
1 Insert the small plug into the socket of the appliance.
2 Put the adapter in a wall socket.
3 Press the on/off button to switch on the appliance.