Connect To A Tv Set And A Decoder; Connect To A Stereo Set - Conrad Eurosky SR 401 Bedienungsanleitung

Connect to a TV set and a decoder

Some coded satellite programs require that a sui-
table external decorder (e.g. a Premiere decoder)
be connected.
Connect the scart link (9) of your satellite receiver
to the scart input of the TV set.
Connect the scart link (8) of your satellite receiver
to the scart input of the decoder. Join the decoder
to the TV set. To correctly connect the decoder,
note the instructions for decoder use. In most
cases, the decoder is connected to the bowl input
of the TV set via a HF cable. This way of connec-
tion requires that the TV set be additionally adju-
sted to the decoder channel.

Connect to a stereo set

The satellite receiver has a facility allowing you to
reproduce the sound via a stereo set.
Connect the cinch output jacks (7) of the satellite
receiver to a vacant cinch input (e.g. AUX) of your
stereo set in addition to establishing the normal
connection. For this connection, use a cinch
connection cable (not comprised in the delivery).
Take care to connect the cinch output for the left-
hand and right-hand audio sounds (channels) to
the stereo set in a correct way.
(white jack = left-hand // red jack = right-hand).
34