Product Description And Features; How To Install - Conrad Eurosky SR 401 Bedienungsanleitung

(13) AUDIO key
Key to set the audio mode.
(14) V/H key
Key to change over between the vertical and horizontal reception level.
(15) +/- key
Keys to vary the values in the setting mode.
(16) SET key
Key to call the setting mode.
(17) Numeric keys
Keys for the direct numeric input of the program site and the settings required.
(18) P/L key
Key to call the child safety and setting protection systems.
(19) MUTE key
Key to mute the sound.
(20) Battery compartment
Compartment to accommodate batteries.

Product description and features

• Analog satellite receiver pre-programmed at works for the analog television pro-
grams of the satellites ASTRA 1A-1D, Eutelsat, Intelsat, Telekom, and Türk-sat.
• Input frequency range 950 MHz – 2,150 MHz
• Audio frequency range 5 MHz – 9 MHz
• DiSEqC 1.0 // 22 kHz control signal
• Stereo
• 500 Program sites
• Simple in operation

How to install

• Remove the satellite receiver and its accessories from the package. Keep the
package for any guarantee claims.
• Find an appropriate place of installation
• When selecting the place of installation consider the spatial conditions such as the
location of the nearest mains socket, the location of the TV set, the bowl connec-
tion, etc. When selecting the place of installation also be careful not to expose the
set to direct sunlight, vibrations, dust, heat, cold or moisture. There should be no
high-efficiency transformers or motors in the vicinity of the set.
31