Maintenance And Care; Ordering Spare Parts - EINHELL EGS 3600 Bedienungsanleitung

2. Pull the lamp socket out of the casing in the
energy station.
3. Remove the lamp carefully with a cloth pressing
the lamp carefully into the casing and twisting it
slightly anti-clockwise.
4. The lamp can now be removed. Take care not to
destroy the reflector.
5. To install the new lamp, proceed in reverse
order.

10 Maintenance and care

¼
Be sure to switch off the energy station and
disconnect all cables from the unit whenever you
perform any cleaning or maintenance work.
¼
As far as possible, use only a soft dry cloth
without any aggressive solvents to clean the
surface. If absolutely necessary, use a slightly
dampened rag to remove dirt.

11 Ordering spare parts

1. Please provide the following information if you
need any spare parts:
2. Type of unit
3. Article number of the unit
4. Identification number of the unit
5. Spare part number of the required spare part
GB
11