Big Max Easy Remote Handbuch Seite 20

2.3. Turning on the Caddy
Before turning the Caddy on make sure that the speed control is in neutral postion.
This is the case when the neutral postion of the speed control is angaged with the internal
spring loaded pin.
By pressing gently on the indicator light (LED), you switch ON the Caddy. The Caddy
will be in the standby mode. The LED will always indicate that the Caddy is turned on.
The color of the LED will also tell you about the battery status of the Caddy. A flashing
LED indicates a fault.
• Green means that the rechargeable battery is full.
• Yellow means that the rechargeable battery has delivered its largest part of the energy.
• Red means the rechargeable battery is almost empty.
• A blinking light gives you further information. See error messages in the supplement.
Remote handheld
2.4. Operating the Caddy
Grasp the rubber part of the handle bar loosely with your hand.
By turning the speed control in forward direction the Caddy will move in the
forward direction. If you want to stop you, you have to turn the speed control into its
neutral postion. By turning the speed control in backwards direction the Caddy will
move in the backward direction until you turn it back into its neutral position
Light / LED for:
ON/OFF
Start/Stop
Speed control
Forward
Backward