Charging In The Charging Stand (Qp6520 Only); Using The Appliance - Philips OneBlade QP6520 Bedienungsanleitung

Charging with the adapter

Charging in the charging stand (QP6520 only)

Using the appliance

- Approx. 30 minutes after the battery is fully
charged or when you disconnect the appliance
from the mains, the lights of the battery status
indicator switch off automatically.
1 Insert the small plug into the appliance and put
the supply unit in the wall socket.
2 After charging, remove the supply unit from the
wall socket and pull the small plug out of the
appliance.
1 Insert the small plug into the charging stand
and put the adapter in the wall socket.
2 Put the appliance in the charging stand.
3 After charging, remove the adapter from the
wall socket and pull the small plug out of the
charging stand.
You can use the appliance to trim, edge or shave
facial hair (beard, moustache and sideburns).
Shave for a smooth result, trim to obtain a certain
length and edge to create perfect edges and sharp
lines. This appliance is not intended for shaving,
edging or trimming hairs on lower body parts or
scalp hair. Take your time when you first start to
use the appliance. You have to acquire practice
with the appliance.
11
English