Quick Charge; Charging In The Charger; Charging In The Jet Clean System (Speciic Types Only); Using The Shaver - Philips RQ1200 Serie Bedienungsanleitung

English
10

Quick charge

After the shaver has charged for 5 minutes, it contains enough energy for
one shave.

charging in the charger

1 Insert the small plug into the charger.
2 Unfold the charger ('click').
3 Put the adapter in the wall socket.
4 Put the shaver in the charger.
, The display shows that the shaver is charging (see chapter 'The
display').

Charging in the Jet Clean System (speciic types only)

1 Put the small plug in the Jet Clean System.
2 Put the adapter in the wall socket.
3 Hold the shaver upside down above the holder with the back of the
shaver pointing towards the holder.
Note: The shaver cannot be placed in the Jet Clean System when the protection
cap is on the shaving unit.
Note: RQ129x only: when you turn the shaver upside down, the minutes
indication on the display is also turned upside down so you can still see to what
level the battery is charged.
4 Place the shaver body in the holder behind the two clips (1) and
press it down until it locks into place (2).
, The display shows that the shaver is charging (see section 'Charging'
in chapter 'The display').

using the shaver

shaving
skin adaptation period
Your irst shaves may not bring you the result you expect and your skin
may even become slightly irritated. This is normal. Your skin and beard need
time to adapt to any new shaving system.
We advise you to shave regularly (at least 3 times a week) for a period of
3 weeks to allow your skin to adapt to the new shaver. During this period,
use your new electric shaver exclusively and do not use other shaving
methods. If you use different shaving methods, it is more dificult for your
skin to adapt to the new shaving system.
1 Press the on/off button once to switch on the shaver.
, The display lights up for a few seconds.