Electromagnetic Fields (Emf) - Philips OneBlade QP6520 Bedienungsanleitung

Electromagnetic fields (EMF)

General
Charging
Battery status indicator QP6520
This Philips appliance complies with all applicable
standards and regulations regarding exposure to
electromagnetic fields.
- This appliance is waterproof. It is suitable for
use in the bath or shower and for cleaning
under the tap. For safety reasons, the appliance
can therefore only be used without cord.
- The supply unit is suitable for mains voltages
ranging from 100 to 240 volts.
- The supply unit transforms 100-240 volts to a
safe low voltage of less than 24 volts.
Note: This appliance can only be used without
cord.
QP6520, QP6510: Charging takes approx. 1 hour. A
fully charged appliance has an operating time of
up to 90 minutes (QP6520) or 60 minutes
(QP6510).
Charge the appliance before you use it for the first
time and when the charge symbol indicates that
the battery is almost empty.
- When the charge symbol flashes orange, the
battery is almost empty. The remaining battery
capacity is indicated by the battery status
percentage shown on the display.
9
English