Switching The Appliance On And Off - Philips OneBlade QP6520 Bedienungsanleitung

12
English

Switching the appliance on and off

Note: This appliance can only be used without
cord.
1 To switch on the appliance, press the on/off
button once.
2 To switch off the appliance, press the on/off
button once.
Before you use the appliance, always check
the blade for damage or wear. If the blade is
damaged or worn, do not use the appliance,
as injury may occur. Replace a damaged
blade before you use the appliance (see
chapter 'Replacement').
Shaving tips and tricks
- Make sure that the blade is in full contact with
the skin by placing it flat on the skin.
- For the best result, move the appliance against
the grain.
- Make long strokes while pressing lightly.
- You can use the appliance dry or wet with gel or
foam. You can even use the appliance in the
shower.
- Shaving a clean beard and face gives the best
results.
1 Switch on the appliance.
2 Place the blade on the skin and move the
appliance up or against the grain in long strokes
while you press it lightly.