Troubleshooting; Customer Service - CONSTRUCTA CD30637 Gebrauchs- Und Montageanleitung

Requirement: The grease filters have been removed.
→ "Removing the grease filter", Seite 20
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Seite 20
Place the grease filters loosely into the dishwasher.
2.
Do not clean heavily soiled grease filters with
utensils.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
Start the dishwasher.
3.
Select a temperature of no more than 70 °C.
Allow the grease filters to drain.
4.
Cleaning grease filters manually
The grease filters filter the grease from the cooking va-
pour. Regularly cleaned grease filters guarantee a high
level of grease removal.
WARNING ‒ Risk of fire!
Fatty deposits in the grease filters may catch fire.
Clean the grease filters roughly every 2 months.
▶

Troubleshooting

You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
Malfunctions
Fault
The appliance is not working.
The LED lighting does not work.

Customer Service

If you have any queries on use, are unable to rectify
faults on the appliance yourself or if your appliance
needs to be repaired, contact Customer Service.
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
Different causes are possible.
Requirement: The grease filters have been removed.
→ "Removing the grease filter", Seite 20
Observe the information regarding the cleaning
1.
agents.
→ "Cleaning products", Seite 20
Soak the grease filter in hot soapy water.
2.
Use special grease solvent for stubborn dirt. You
can obtain grease solvents from after-sales service
or the online shop.
Use a brush to clean the grease filters.
3.
Rinse the grease filters thoroughly.
4.
Allow the grease filters to drain.
5.
Fitting grease filters
ATTENTION!
Falling grease filters may damage the hob below.
Grip below the grease filter with one hand.
▶
Fit the grease filters.
1.
Fold the grease filters upwards and engage the
2.
locks.
Make sure that the locks engage.
3.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.
troubleshooting
Connect the appliance to the power sup-
▶
ply.
Check the circuit breaker in the fuse box.
▶
Check whether the lighting in your kitchen
▶
or other appliances are working.
Defective LED lights may be replaced by
▶
the manufacturer, their customer service
or a qualified technician (electrician) only.
Call the after-sales service.
▶
→ "Customer Service", Seite 21
You can solve many problems yourself by consulting
the information on troubleshooting in these instructions
or on our website. If this is not the case, contact our
after-sales service.
Troubleshooting en
21