Topcom ULTRA RANGE Bedienungsanleitung Seite 34

– go to the beginning of the current message by pressing
once.
– go to the previous message by pressing
– stop playback by pressing
– go to the next message by pressing
– to delete the current played message, press
1. Press 2 on the handset:
• When you have new messages, the first messages will be
played.
• When you have no new messages you will enter the
'
Select ' ' and confirm
2. During playback, press
– ' ' to repeat current message.
– '
– ' ' to go to the next message.
– ' ' to delete the current played message.
One can also erase all heard messages at one time. This erases
only the messages that have already been heard. New messages
are not erased.
1. Press the delete
• A confirmation tone will be heard.
1. Select '
2. Press to confirm.
17
34
Downloaded from www.Manualslib.com
.
' menu.
.
17
and select:
17
' to go to the previous message.
key for more than 2 seconds.
' in the '
manuals search engine
If the memory is full, '
twice.
display. The base LED display
is on and answer record mode is set. If the answering machine is
.
turned on and a call comes in, the machine will automatically play
.
answering only outgoing message.
1. Erase all the messages after listening to them.
• The memory is free again.
The answering machine can only be operated remotely using a
phone equipped with DTMF (Dual Tone Multi-Frequency, or tone
dialling). To be able to operate the answering machine remotely
you have to turn on the remote access (see "11.7 Turning on the
remote access").
1. Call your machine.
• The answering machine picks up the line, you hear the
outgoing message and a beep.
2. While the outgoing message is played, slowly dial
followed by the base PIN code (default 0000).
• You will hear a short beep for confirmation. The LED counter
23 on the base will show ' ' blinking and '
appear on the handset(s) display.
• In case there are new messages, playback will start
immediately.
3. If there are no new messages the base will go to command
waiting mode:
' menu.
• Press '2' (listen to messages). The answer machine will play
the messages.
During playback, you have the following options:
' will appear on the handset
will show ' ' blinking when it
23
8
'