Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The handset starts to ring during an incoming external or internal
call.
•
All registered handsets ring when there is an incoming call.
•
The call symbol
•
The caller's number appears in the display if you have caller
ID (CLIP). Contact your telephone line provider for more
information. The caller's name is also shown in the display if:
– the number is stored with the name in the phone book;
– the network transmits the name along with the phone
number.
1. You have the following options for answering a call:
– Press
– Pick up the handset from the base station or charging
station (function only possible if auto talk has been
activated, see "4.24 Auto talk").
•
During the call, the symbol
and name are shown for 10 seconds, then the call duration is
shown in the display.
2. To end the call, press
see "4.25 Auto hang-up") replace the handset on the base
station or charging station.
When you receive a call, the caller's number, the date and time
appear on the handset display. If the name is stored in the phone
book, this is also shown. You need to have the "caller ID" (CLIP)
Downloaded from
www.Manualslib.com
flashes in the display.
14
to answer the call.
, the transmitted caller number
or (if auto hang-up is set on,
6
manuals search engine
feature activated by your telephone line provider for a call to be
entered in the calls list.
The "caller ID" (CLIP) feature is only available if it is
activated for your line. Contact your telephone line
provider for additional information.
Incoming calls are stored in a calls list (max. 30 numbers). When
the memory is full, new calls automatically overwrite the oldest
number in the list. The upper symbol
when there are new unanswered calls in the calls list and '
' is shown in the centre of the display next to the
symbol. If the calls list is empty and you press
' appears in the display.
4.6.1 Viewing entries in the calls list
1. Press
5
briefly to view the newest entry.
•
The number of the latest caller is displayed in the top line. If
the caller's name is entered in the phone book, this is shown in
the second line. If there is no entry and the caller's number
also was not transmitted, '
The date and time at which each call was received are
displayed at the bottom line.
Press
to view other entries in the list.
5
If you do not press any of the
seconds, the telephone automatically reverts to standby
mode.
4.6.2 Calling a number in the calls list
1. Press
to open the calls list.
5
4
15
2. Use
or
to select the telephone number you want.
3. Press
14
when the number appears in the display.
•
The telephone number is automatically dialled.
flashes in the display
5
, '
' is displayed.
4
15
or
keys for 35
17
Werbung
Inhaltsverzeichnis
